Monolithic Stirrer Reactors for the Sustainable Production of Dihydroxybenzenes over 3D Printed Fe/γ-Al2O3 Monoliths: Kinetic Modeling and CFD Simulation
Open Access
Abstract
The aim of this work is to evaluate the performance of the stirring 3D Fe/Al2O3 monolithic reactor in batch operation applied to the liquid-phase hydroxylation of phenol by hydrogen peroxide (H2O2). An experimental and numerical investigation was carried out at the following operating conditions: CPHENOL,0 = 0.33 M, CH2O2,0 = 0.33 M, T = 75–95 °C, P = 1 atm, ω = 200–500 rpm and WCAT ~ 1.1 g. The kinetic model described the consumption of the H2O2 by a zero-order power-law equation, while the phenol hydroxylation and catechol and hydroquinone production by Eley–Rideal model; the rate determining step was the reaction between the adsorbed H2O2, phenol in solution with two active sites involved. The 3D CFD model, coupling the conservation of mass, momentum and species together with the reaction kinetic equations, was experimentally validated. It demonstrated a laminar flow characterized by the presence of an annular zone located inside and surrounding the monoliths (u = 40–80 mm s−1) and a central vortex with very low velocities (u = 3.5–8 mm s−1). The simulation study showed the increasing phenol selectivity to dihydroxybenzenes by the reaction temperature, while the initial H2O2 concentration mainly affects the phenol conversion.Keywords
Funding Information
- Spanish Government (RTI2018-095052-BI00)
- Comunidad de Madrid (S2018/EMT-4341)
- Consejo Superior de Investigaciones Científicas (COOPB20405)
- Community of Madrid and the European Social Fund (PEJ-2019-AI/IND-14385)
This publication has 39 references indexed in Scilit:
- Synthesis of Propylene Carbonate from Urea and 1,2-Propylene Glycol in a Monolithic Stirrer ReactorIndustrial & Engineering Chemistry Research, 2013
- Integrated 3D-printed reactionware for chemical synthesis and analysisNature Chemistry, 2012
- The Yeoh model applied to the modeling of large deformation contact/impact problemsInternational Journal of Impact Engineering, 2009
- CFD simulations of two stirred tank reactors with stationary catalytic basketChemical Engineering Science, 2006
- A novel structured bioreactor: Development of a monolithic stirrer reactor with immobilized lipaseCatalysis Today, 2005
- Performance of the monolithic stirrer reactor: applicability in multi-phase processesChemical Engineering Science, 2004
- Monolithic Catalysts as an Alternative to Slurry Systems: Hydrogenation of Edible OilIndustrial & Engineering Chemistry Research, 2004
- Modeling of monolithic and trickle-bed reactors for the hydrogenation of styreneChemical Engineering Science, 2003
- New non-traditional multiphase catalytic reactors based on monolithic structuresCatalysis Today, 2001
- Novel monolithic stirred reactorAIChE Journal, 1998