Automatic Measurement of External Thread at the End of Sucker Rod Based on Machine Vision
Open Access
Abstract
Aiming at the low efficiency of manual measurement of threads and the lack of practicability in machine vision measurement before, online size measurement of threads at the end of sucker rods based on machine vision was studied. A robotic arm is used to carry an optical device to achieve high-quality image acquisition of threads. Based on the prior knowledge of the thread profile angle, the directional edge detection operator is customized to achieve the accurate detection of the left and right edges of the thread. Noise filtering, sorting, and left and right edge-matching algorithms based on connected domains are developed to eliminate the interference effects of electrostatic dust and oil pollution in online measurement, and the dimension of thread profile angles, pitches, major diameters, and minor diameters can be precisely calculated. The experimental results show that the screw thread parameter measurement time is about 0.13 s; the maximum and minimum average errors of the thread angles are 0.011° and 0.632°, respectively; and the total average deviation is less than 0.08°. For the screw thread pitch, major diameter, minor diameter, and pitch diameter parameter measurement, the deviation of the measurement results between the proposed method and the universal tool microscope (UTM) method is less than 10 μm. It fully proves the effectiveness and accuracy of the method in this paper and, at the same time, shows that the method has good real-time performance and high application significance, which lays a good foundation for the subsequent online thread measurement.Keywords
Funding Information
- National Key R&D Program of China (2021YFB3202403)
- National Natural Science Foundation of China (51874022)
This publication has 31 references indexed in Scilit:
- Detection of Screw Threads in Computed Tomography 3D Density FieldsMeasurement Science Review, 2013
- Thread Measurement Algorithm Research and Software DevelopmentKey Engineering Materials, 2013
- Study of boronizing of steel AISI 8620 for sucker rodsMetal Science and Heat Treatment, 2012
- Research on Screw Thread Vision MeasurementAdvanced Materials Research, 2011
- Development of a novel laser-based measuring system for the thread profile of ballscrewOptics and Lasers in Engineering, 2010
- Development of an Algorithm to Detect Screw Threads in Planar Point CloudsMeasurement Science Review, 2010
- A flexible new technique for camera calibrationIEEE Transactions on Pattern Analysis and Machine Intelligence, 2000
- Automatic vision inspection and measurement system for external screw threadsJournal of Manufacturing Systems, 1994
- Digital Image ProcessingLeonardo, 1981
- Depth-First Search and Linear Graph AlgorithmsSIAM Journal on Computing, 1972