Design and Optimization of an Electric Vehicle Wireless Charging System Using Interleaved Boost Converter and Flat Solenoid Coupler
- 25 August 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (4) , 3894-3908
Abstract
Simple but effective output voltage/current control schemes are essential for electric vehicle wireless charging systems (EVWCSs). This paper proposes an EVWCS using interleaved Boost converter (IBC) and flat solenoid coupler (FSC). The closed-loop control between the primary and secondary is realized by adjusting the duty cycle of the IBC. The currents and losses in the primary are reduced in the proposed system because the DC bus voltage in the primary is increased by using the IBC. The input current ripple is diminished owing to the interleaved structure. This paper also proposes a parameter optimization method to obtain the optimal FSC. Without loss of generality, the total area of the transmitter (Tx) and receiver (Rx) is assumed to be constant, and the Tx is assumed to be larger than the Rx. A scale-down prototype whose output power is 500 W was built in the laboratory to verify the theoretical analysis. The output voltage of the prototype kept constant when the misalignment was 200 mm in the winding direction or 100 mm in the magnetic direction. A highest system efficiency, from DC input to DC output, of 90.1% was achieved when the power transfer distance was 170 mm.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities
This publication has 24 references indexed in Scilit:
- An LCC-Compensated Resonant Converter Optimized for Robust Reaction to Large Coupling Variation in Dynamic Wireless Power TransferIEEE Transactions on Industrial Electronics, 2016
- A 3-kW Wireless Power Transfer System for Sightseeing Car Supercapacitor ChargeIEEE Transactions on Power Electronics, 2016
- Modeling and Optimization of Magnetically Coupled Resonant Wireless Power Transfer System With Varying Spatial ScalesIEEE Transactions on Power Electronics, 2016
- Modeling and Optimization of Class-E Amplifier at Subnominal Condition in a Wireless Power Transfer System for Biomedical ImplantsIEEE Transactions on Biomedical Circuits and Systems, 2016
- Design and optimizations of solenoid magnetic structure for inductive power transfer in EV applications2015
- High-Efficiency Contactless Power Transfer System for Electric Vehicle Battery Charging ApplicationIEEE Journal of Emerging and Selected Topics in Power Electronics, 2014
- An Approximate Dynamic Model of LCL- $T$-Based Inductive Power Transfer Power SuppliesIEEE Transactions on Power Electronics, 2013
- A large air gap 3 kW wireless power transfer system for electric vehicles2012
- New technique for inductive power transfer using a single controllerIET Power Electronics, 2012
- Small-size light-weight transformer with new core structure for contactless electric vehicle power transfer system2011