Particle Deposition in the Vicinity of Multiple Film Cooling Holes
Open Access
- 26 March 2022
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 13 (4) , 523
Abstract
Particle deposition on film cooling surface is an engineering issue that degrades the thermal protection of turbine blade. Here, we present a combined experimental and numerical investigation on the particle deposition in the vicinity of multiple film cooling holes to reveal the effect of interactions between cooling outflows on particle deposition. The numerical simulation of film cooling with a group of three rows of straight film cooling holes is conducted and validated by experimental data with blowing ratios ranging from 0 to 0.08. Wax particles with size range from 5 to 40 μm are added in the heated mainstream to simulate the particle deposition in the experiment. The simulation results show the decrease of particle deposition with blowing ratio and various deposition characteristics in different regions of the surface. The flow fields from numerical results are analyzed in detail to illustrate deposition mechanism of the particles in different regions under the interactions of cooling outflows. The cooling air from the holes in the first row reduces the particle concentration near the wall but causes particle deposition in or between the tail regions by the generated flow disturbance. The cooling air from the latter hole separates the diluted flow in the upstream from the wall, and creates a tail region without particle deposition. This revealed particle deposition characteristics under the effect of outflows interaction can benefit the understanding of particle deposition in engineering applications, where multi-row of cooling holes are utilized.Keywords
This publication has 20 references indexed in Scilit:
- Investigation of Particle Deposition Characteristics in Vicinity of Laidback Fan-shaped Film Cooling HolesFlow, Turbulence and Combustion, 2016
- Simulations of Multiphase Particle Deposition on a Gas Turbine Endwall With Impingement and Film CoolingJournal of Turbomachinery, 2015
- Numerical Investigation of Partial Blockage Effect on Film Cooling EffectivenessMathematical Problems in Engineering, 2014
- Deposition Near Film Cooling Holes on a High Pressure Turbine VaneJournal of Turbomachinery, 2011
- Effects of Simulated Particle Deposition on Film CoolingJournal of Turbomachinery, 2010
- Effects of Syngas Ash Particle Size on Deposition and Erosion of a Film Cooled Leading EdgeJournal of Turbomachinery, 2010
- Investigation of Sand Blocking Within Impingement and Film-Cooling HolesJournal of Turbomachinery, 2010
- Erosion and Deposition in TurbomachineryJournal of Propulsion and Power, 2006
- A Review of Shaped Hole Turbine Film-Cooling TechnologyJournal of Heat Transfer, 2005
- Effects of hole geometry and density on three-dimensional film coolingInternational Journal of Heat and Mass Transfer, 1974