Heat treatment effects on microstructure and properties of advanced high-strength steels
Authors:
- 1 December 2023
- journal article
- research article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 39 (17) , 2642-2661
Abstract
The effects of the austempering time on the microstructure and properties of two third-generation high-strength steels are investigated for austempering (TBF), and for quenching and partitioning (QP). The process parameters are chosen according to the capacity of an existing continuous annealing or galvanising line. More than 10% retained austenite can be stabilised although carbides start to form at short overageing times with the simulated cycles. The product of the tensile strength and total elongation for TBF is higher than for QP, and it peaks with increasing austempering time for TBF, but decreases monotonously for QP. The hole expansion capacity for QP is higher than for TBF and it peaks with austempering time for both TBF and QP.Keywords
This publication has 47 references indexed in Scilit:
- Exploring Carbide-Free Bainitic Structures for Hot Dip Galvanizing ProductsISIJ International, 2013
- Microstructural development during the quenching and partitioning process in a newly designed low-carbon steelActa Materialia, 2011
- Influence of interface mobility on the evolution of austenite–martensite grain assemblies during annealingActa Materialia, 2009
- Decomposition of retained austenite during coiling process of hot rolled TRIP-aided steelsMaterials Science and Engineering: A, 2004
- Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformationCurrent Opinion in Solid State and Materials Science, 2004
- Structure–properties relationship in TRIP steels containing carbide-free bainiteCurrent Opinion in Solid State and Materials Science, 2004
- Retained Austenite Characteristics and Stretch-flangeability of High-strength Low-alloy TRIP Type Bainitic Sheet Steels.ISIJ International, 2002
- Stretch-flangeability of a High-strength TRIP Type Bainitic Sheet Steel.ISIJ International, 2000
- Determination of Carbon Content in Bainitic Ferrite and Carbon Distribution in Austenite by Using CBKLDPMaterials Characterization, 1998
- Trip and its kinetic aspects in austempered 0.4C-1.5Si-0.8Mn steelScripta Metallurgica, 1987