CF 4 :O 2 surface etching for the improvement of contact resistance and high-temperature reliability in Ni/Nb ohmic contacts on n-type 4H-SiC

Authors:

Abstract
The influence of CF 4 :O 2 surface etching on the formation of Ni/Nb ohmic contact to n-type 4H-SiC substrates was investigated. The specific contact resistivity extracted from the transmission line model showed that the contact with CF 4 :O 2 etching had lower contact resistance than that of the sample without the etching process. The X-ray diffraction results showed that a higher concentration of Ni 2 Si formed at the interface of the contact after the fabrication process resulted in a lower specific contact resistivity. Moreover, the depth distribution of the elements revealed that under the CF 4 :O 2 surface etching, a low density of the excess carbon atoms at the interface of the contact was observed. Transmission electron microscopy also confirmed that the low concentration of excess carbon atoms and the high density of Ni 2 Si at the interface play an important role in low specific contact resistivity as well as the high temperature reliability of the Ni/Nb/4H-SiC contacts undergoing CF 4 :O 2 treatment.
Funding Information
  • JSPS KAKENHI (JP17H03253)
  • JSPS KAKENHI (JP15KK0240)

This publication has 36 references indexed in Scilit: