Reinforcement of Nylon‐6 Filaments with SiO2 Nanoparticles and Comparison of Young's Modulus with Theoretical Bounds
Authors:
- 11 April 2007
- journal article
- research article
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 292 (4) , 437-444
Abstract
Spherical silica nanoparticles were infused into nylon‐6 and drawn into filaments through a melt‐extrusion process. The idea was to improve the strength and stiffness of the resulting filaments by utilizing the interactions between the nanoparticles and the polymer. The focus was to increase the fracture strain of the filaments, as this had not been possible earlier with the infusion of carbon nanotubes. It has been observed that with the infusion of silica nanoparticles, the strength and Young's modulus of the nylon filament can be enhanced in the 28 to 36% range without any loss of fracture strain. The source of this improvement has been traced to the formation of stronger amide and carbonyl bonds, nucleated by the presence of SiO2 nanoparticles during polymerization. Moreover, calculations based on basic theories of inclusions show that the Young's modulus of the nanophased filament is within 5% of the upper bound predicted by the micromechanical theory. magnified imageKeywords
This publication has 22 references indexed in Scilit:
- Enhancement of strength and stiffness of Nylon 6 filaments through carbon nanotubes reinforcementApplied Physics Letters, 2006
- Growth of Carbon Nanotubes on Clay: Unique Nanostructured Filler for High‐Performance Polymer NanocompositesAdvanced Materials, 2005
- Crystallization behavior of nylon 6 nanocompositesPolymer, 2003
- Preparation and characterization of nickel–polystyrene nanocomposite by ultrasound irradiationJournal of Applied Polymer Science, 2002
- Distribution and alignment of carbon nanotubes and nanofibrils in a polymer matrixComposites Science and Technology, 2002
- Nanocomposite FibersMRS Proceedings, 2002
- Preparation of amorphous magnetite nanoparticles embedded in polyvinyl alcohol using ultrasound radiationJournal of Materials Chemistry, 2000
- The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned compositesPolymer Composites, 1984
- Low speed calibration formula for vortex shedding from cylindersThe Physics of Fluids, 1973
- The determination of the elastic field of an ellipsoidal inclusion, and related problemsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1957