Design and Optimization of Soil-Engaging Components for Intelligent Seedbed Preparation in Water-Limited Cropping Systems: A Critical Review
Authors:
- Yurii SyromiatnykovYurii Syromiatnykov
- Farmon MamatovFarmon Mamatov
- Sanjar ToshtemirovSTSanjar Toshtemirov
- Sherzod KurbanovSKSherzod Kurbanov
- Uchkun KodirovUKUchkun Kodirov
- Dilsabo ChoriyevaDCDilsabo Choriyeva
- Golib ShodmonovGSGolib Shodmonov
- Moxichexra BegimkulovaMBMoxichexra Begimkulova
- Shakhriyor JalilovSJShakhriyor Jalilov
- Azamat SafarovASAzamat Safarov
- Muso XidirovMXMuso Xidirov
- Gayrat OtamurodovGOGayrat Otamurodov
Preprint
- 31 August 2026
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Intelligent seedbed preparation requires more than an optimized soil-engaging component: field condition must be diagnosed, a controllable setting must be adjusted, and the resulting soil zone must be verified. This critical review synthesizes 133 sources across soil mechanics, component design, numerical modeling, field validation, and sensing-control research for water-limited cropping systems. Evidence was compared as bounded within-study contrasts rather than pooled effects because outcome definitions, soils, operating regimes, and validation scales differ. Four recurring conflicts organize the synthesis: fracture versus draft, tilth versus evaporative exposure, residue retention versus blockage, and immediate loosening versus persistence. Reported examples include an increase in the <50-mm aggregate fraction from 76.1% to 88.0%, a study-specific fragmentation index increase from 83.0% to 94.54%, a 43–47% reduction in penetration resistance after geometry-optimized loosening, and rainfall-dependent water-use-efficiency gains of 6.0–11.7% after subsoiling. These values are retained as study-specific anchors, not universal settings. The proposed framework adds value by linking four decision stages—field diagnosis, component design, controlled operation, and post-pass verification—while explicitly separating conventional optimization, monitored operation, and closed-loop intelligent control.Keywords
All Related Versions
- Version 1, 2026-08-31, Preprints
- Published version: Agriengineering, 8 (9), 376.
This publication has 120 references indexed in Scilit:
- Modeling the interaction of soil and a vibrating subsoiler using the discrete element methodComputers and Electronics in Agriculture, 2020
- Simulation of tillage forces and furrow profile during soil-mouldboard plough interaction using discrete element modellingBiosystems Engineering, 2020
- Discrete element modelling of tillage forces and soil movement of a one-third scale mouldboard ploughBiosystems Engineering, 2017
- Three-dimensional discrete element modelling (DEM) of tillage: Accounting for soil cohesion and adhesionBiosystems Engineering, 2015
- Three-dimensional discrete element modelling of tillage: Determination of a suitable contact model and parameters for a cohesionless soilBiosystems Engineering, 2014
- Sensor systems for measuring soil compaction: Review and analysisComputers and Electronics in Agriculture, 2008
- Effects of soil tillage and fallow management on soil water storage and sunflower production in a semi-arid Mediterranean climateAgricultural Water Management, 2006
- A model for predicting soil-tool interactionJournal of Terramechanics, 1988
- An experimental investigation into the deep loosening of soil by rigid tinesJournal of Agricultural Engineering Research, 1978
- Soil failure with narrow tinesJournal of Agricultural Engineering Research, 1977