Yurii Syromiatnykov has a total of 157 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Reproducible Simulation‐Assisted Framework for Teaching Nonlinear Pendulum Dynamics in Engineering Education

    by Yurii Syromiatnykov, Khurshid Chuyanov, Farmon Mamatov, Dustmurod Chuyanov, Khurshid Ilkhomov, Makhmatmurod Shomirzaev, Dilrabo Shadieva, Zafar Batirov, Ergash Sharipov, Mirshohid Egamov

    Computer‐based simulation is increasingly important in engineering‐oriented STEM education, but students often experience mathematical modeling, numerical integration, visualization, and physical interpretation as separate learning activities. This study developed and pilot‐evaluated a reproducible simulation‐assisted framework for teaching nonlinear pendulum dynamics through one aligned workflow. Its distinctive contribution is the explicit connection of analytical model formulation, dimensionless state‐space representation, fixed‐step numerical integration, phase‐space visualization, Hamiltonian energy diagnostics, and assessment of students’ interpretation of the contrast between classical RK4 and symplectic Störmer–Verlet integration. The pilot implementation involved 30 undergraduate students who completed four computer‐assisted laboratory sessions over 12 academic hours. Learning outcomes were assessed using parallel pre‐test and post‐test instruments covering six dimensions: governing‐equation interpretation, phase‐space classification, energy‐based reasoning, numerical‐integration understanding, comparison of RK4 and symplectic integration, and visualization interpretation. The mean score increased from 48.2% in the pre‐test to 73.0% in the post‐test, corresponding to a mean paired gain of 24.8 percentage points. The paired effect size was large, with Cohen's d_z = 1.87, and the mean normalized learning gain was moderate, g = 0.489. The strongest gains were observed in phase‐space classification and comparison of RK4 with Störmer–Verlet integration. These results provide pilot evidence that reproducible simulation, visualization, and energy‐aware numerical diagnostics can support short‐term computational understanding of nonlinear dynamics. Causal or comparative superiority is not claimed because the study used one cohort, no control group, N = 30, one institution, and an immediate post‐test.

  • Open Access

    Feedstock-Adaptive Valorisation of Agro-Industrial Organic Waste: Pretreatment, Biological Conversion, and Resource Recovery

    by Yurii Syromiatnykov, Marcin Niemiec

    Agro-industrial organic wastes differ markedly in moisture, structure, biochemical composition, nutrient value, and contaminant risk, so pretreatment should be selected from the limiting feedstock constraint rather than from a generic technology hierarchy. This critical narrative review examines feedstock-adaptive valorisation routes centred on anaerobic digestion and subsequent recovery of energy, nutrients, carbon-rich fractions, fertilisers, humic-like materials, and plant-biostimulant products. Unlike technology-centred syntheses, the review uses the dominant feedstock constraint as a common comparison axis across pretreatment, biological stability, and product qualification. Mechanical, mechanochemical, cavitation-based, thermal, chemical, and biological treatments are compared in terms of the barrier they remove, their energy and material burden, downstream biological response, and recovered-product quality. The evidence shows that particle-size reduction, solubilisation, or methane yield alone is insufficient for process selection. A minimum-sufficient-pretreatment heuristic is therefore proposed: treatment intensity is increased only until a predeclared conversion or product-quality objective is reached while stability, safety, and positive incremental net benefit are retained. Zero pretreatment remains a valid outcome when concentration, co-digestion, feeding control, biomass retention, or another intervention better addresses the dominant constraint. The framework also highlights the need for harmonised energy reporting, mass balance, continuous validation, and product-specific qualification before laboratory improvements are translated to industrial operation.


  • Open Access

    Independent Engineering Transfer After Traceable Generative-AI-Assisted Learning: A Six-University Controlled Trial with Deterministic Cluster Allocation in Agricultural Engineering Education

    by Yurii Syromiatnykov, Farmon Mamatov, Khurshid Chuyanov, Zafar Batirov, Dustmurod Chuyanov, Makhmatmurod Shomirzaev, Dilrabo Shadieva, Khurshid Ilkhomov, Gulandom Jo’Rayeva, Mirshohid Egamov

    Generative artificial intelligence (GenAI) can support engineering problem solving, but whether AI-assisted practice transfers to independent performance after the tool is removed remains unclear. This multicentre controlled trial evaluated a traceable five-stage GenAI-assisted learning configuration in agricultural engineering education. Twenty-eight second- and third-year classes from six universities in Uzbekistan were assigned within nine teacher blocks by deterministic constrained minimization to GenAI (14 classes) or structured active-control (14 classes) groups. Both groups completed the same 16-week module, tasks, software, contact time, feedback, and verification requirements. They differed in the source and adaptivity of a provisional alternative used after an independent attempt: bounded adaptive GenAI dialogue versus a version-controlled curated alternative. The full assigned cohort included 656 students; likelihood-based available-outcome analyses included 641 immediate and 589 delayed outcomes. Kenward–Roger analyses estimated an adjusted immediate difference of 2.78 points (95% confidence interval (CI) [2.02, 3.55]; p < 0.001; model-based d = 0.72) and a delayed difference of 2.34 points (95% CI [1.54, 3.14]; p < 0.001; d = 0.51). The results show a positive adjusted association for the evaluated traceable instructional configuration, but deterministic post-baseline allocation limits causal interpretation.

  • Open Access

    Design and Optimization of Soil-Engaging Components for Intelligent Seedbed Preparation in Water-Limited Cropping Systems: A Critical Review

    by Yurii Syromiatnykov, Farmon Mamatov, Sanjar Toshtemirov, Sherzod Kurbanov, Uchkun Kodirov, Dilsabo Choriyeva, Golib Shodmonov, Moxichexra Begimkulova, Shakhriyor Jalilov, Azamat Safarov, et al.

    Intelligent seedbed preparation requires more than an optimized soil-engaging component: field condition must be diagnosed, a controllable setting must be adjusted, and the resulting soil zone must be verified. This critical review synthesizes 132 unique sources across soil mechanics, component design, numerical modeling, field validation, and sensing-control research for water-limited cropping systems. Evidence was compared as bounded within-study contrasts rather than pooled effects because outcome definitions, soils, operating regimes, and validation scales differ. Four recurring conflicts organize the synthesis: fracture versus draft, tilth versus evaporative exposure, residue retention versus blockage, and immediate loosening versus persistence. Reported examples include an increase in the <50 mm aggregate fraction from 76.1% to 88.0%, a study-specific fragmentation index increase from 83.0% to 94.54%, a 43–47% reduction in penetration resistance after geometry-optimized loosening, and rainfall-dependent water-use-efficiency gains of 6.0–11.7% after subsoiling. These values are retained as study-specific anchors, not universal settings. The proposed framework adds value by linking four decision stages—field diagnosis, component design, controlled operation, and post-pass verification—while explicitly separating conventional optimization, monitored operation, and closed-loop intelligent control.


  • Open Access

    Design and Optimization of Soil-Engaging Components for Intelligent Seedbed Preparation in Water-Limited Cropping Systems: A Critical Review

    by Yurii Syromiatnykov, Farmon Mamatov, Sanjar Toshtemirov, Sherzod Kurbanov, Uchkun Kodirov, Dilsabo Choriyeva, Golib Shodmonov, Moxichexra Begimkulova, Shakhriyor Jalilov, Azamat Safarov, et al.

    Intelligent seedbed preparation requires more than an optimized soil-engaging component: field condition must be diagnosed, a controllable setting must be adjusted, and the resulting soil zone must be verified. This critical review synthesizes 133 sources across soil mechanics, component design, numerical modeling, field validation, and sensing-control research for water-limited cropping systems. Evidence was compared as bounded within-study contrasts rather than pooled effects because outcome definitions, soils, operating regimes, and validation scales differ. Four recurring conflicts organize the synthesis: fracture versus draft, tilth versus evaporative exposure, residue retention versus blockage, and immediate loosening versus persistence. Reported examples include an increase in the <50-mm aggregate fraction from 76.1% to 88.0%, a study-specific fragmentation index increase from 83.0% to 94.54%, a 43–47% reduction in penetration resistance after geometry-optimized loosening, and rainfall-dependent water-use-efficiency gains of 6.0–11.7% after subsoiling. These values are retained as study-specific anchors, not universal settings. The proposed framework adds value by linking four decision stages—field diagnosis, component design, controlled operation, and post-pass verification—while explicitly separating conventional optimization, monitored operation, and closed-loop intelligent control.


  • Open Access

    Integrated Multi-Row Onion Production Under Contrasting Seasonal Conditions: Seeder Optimization, Nutrient Management, Crop Protection, and EIQ-Adjusted Sustainability

    by Farmon Mamatov, Yurii Syromiatnykov, Akmal Eshdavlatov, Abdirasuli Ibragimov, Vitaliy Snitko, Nurmukhammad Khamidov, Abdukarim Abdurakhmanov, Rustam Tovashov, Said Yuldoshev, Shavkat Ravshanov, et al.

    Reliable establishment of direct-seeded onion requires coordinated control of sowing geometry, nutrient supply, crop protection, and resource use. This study combined Hartley-4 optimization of a four-section, multi-row ridge seeder with a two-year randomized complete block experiment comprising ten fertilization × crop-protection treatments. Engineering tests at 5.2, 6.4, and 7.6 km h−1 identified a central operating setting at 6.4 km h−1 that maintained a sowing depth of 1.5–2.0 cm and depth variability below 0.5 cm. In field plots, chemical protection with vermicompost produced the highest mean total yield (25.54 t ha−1), whereas chemical split NPK maximized marketable and standard yields. Biological split NPK showed the greatest two-season yield retention (0.780), although biological protection was associated with higher downy mildew severity. The biological biocomplex treatment ranked highest under the author-defined EIQ-adjusted resource-efficiency screening index, but sensitivity analysis showed that intermediate rankings depended on aggregation assumptions. The optimized design provides manufacturers with validated parameter ranges and gives users a constant-speed platform for comparing crop-management programs. Future research should test the seeder across contrasting soil textures and speeds and directly measure field capacity, fuel use, and long-term agronomic performance.


  • Open Access

    Soil Fragmentation, Surface Roughness and Draft Force in Chisel Tillage with a Toothed Roller: Experimental and Analytical Study

    by Yurii Syromiatnykov, Farmon Mamatov, Sherzod Kurbanov, Makhmatmurod Shomirzaev, Asroriddin Kasimov, Ibrohim Khasanov, Dilsabo Choriyeva, Muxtor Khalilov, Samar Ochilov, Sunatullo Badalov, et al.

    Efficient seedbed preparation under conservation-oriented tillage requires balanced aggregate fragmentation, surface microrelief and energy demand. This study investigated the influence of passive toothed roller parameters on soil fragmentation, surface roughness, draft force and fuel consumption during chisel tillage under medium-loam Calcisol conditions. Three configurations were compared: a chisel plow without a roller, with a slat roller and with a toothed roller. An analytical framework describing aggregate capture, tooth–soil contact frequency and resistance formation was combined with field experiments and regression-based response surface analysis. The toothed roller improved measured soil treatment indicators compared with the no-roller and slat-roller configurations due to discrete tooth–soil interaction, localized stress concentration and repeated loading of loosened aggregates. Rational parameter ranges were identified: a roller diameter of 0.45–0.46 m, 13–15 teeth, transverse spacing of 8.0–8.6 cm, a tooth height of 7.5–8.5 cm and specific load of 0.9–1.1 kN m−1. Under the selected configuration, aggregates smaller than 50 mm increased from 76.1% to 88.0%, surface roughness decreased from 6.8 to 3.7 cm and residue retention remained above 60%. Fuel consumption increased to 28.4–28.5 L ha−1, reflecting the additional energetic cost of fragmentation and levelling. The approach supports rational selection of passive toothed roller parameters under the tested conditions.


  • Open Access

    Low-Energy Pretreatment of Organic Waste Using a Vortex Layer Reactor: Effects on Biogas Production, Carbon Conversion, and Process Optimization

    by Marcin Niemiec, Marcin Suder, Małgorzata OkręGlicka, Monika Komorowska, Yurii Syromiatnykov, Jakub Sikora, Karolina Jakóbik

    The sustainable management of agri-food waste is a key challenge in the context of the circular economy and energy transition. Anaerobic digestion is an effective method for converting organic waste into renewable energy; however, its efficiency is often limited by substrate properties, such as high lignin content, low biodegradability, and unfavorable C: N ratios. This study evaluates a low-energy pretreatment method based on a Vortex Layer Reactor (VLR, equivalent to the AVS-100 system) applied to slaughterhouse waste, swine manure, and spent mushroom substrate. The analysis included biogas yield, methane production, carbon conversion, process kinetics, and net energy efficiency. The results showed that pretreatment effectiveness depends on substrate type. No improvement was observed in slaughterhouse waste, with net energy efficiency decreasing by approximately 9%. In contrast, biogas yield increased by 14% for swine manure and 18% for spent mushroom substrate, with a maximum net energy gain of 17.6%. The process required only 2.16–3.6 kWh·Mg−1 (about 9 kWh·Mg−1 TS), significantly less than conventional methods. The findings indicate that pretreatment should be applied selectively, depending on substrate characteristics. This study supports decision-making in biogas plant management by integrating technological efficiency with energy and operational criteria.


  • Open Access

    Green Skills in Finance for a Sustainable Bioeconomy: Systematic Literature Review

    by Antonina Sholoiko, Farmon Mamatov, Yurii Syromiatnykov, Oksana Spasichenko, Fakhridin Karshiev, Makhmatmurod Shomirzaev, Shavkat Azizov, Nargiza Ravshanova, Alim Axmedov, Shukhrat Gadaymuradov, et al.

    The transition toward a sustainable bioeconomy and the integration of environmental, social, and governance (ESG) principles into finance have increased the demand for green skills in the financial sector. However, the literature remains fragmented, as green skills are often discussed through related constructs such as ESG competencies, sustainability knowledge, green human capital, green training, or green HRM outcomes. This study systematizes existing research and develops a finance-specific framework explaining what green skills in finance are, how they are formed, and how they support sustainable practice and bioeconomy-oriented capital allocation. A systematic literature review was conducted in accordance with PRISMA 2020 guidelines through searches in Scopus, Web of Science, and Google Scholar. After applying predefined inclusion and exclusion criteria, 47 articles were included. The findings show that green skills in finance are multidimensional and include environmental and sustainability knowledge, digital and analytical skills, behavioral and value-oriented skills, and managerial, strategic, and creative capabilities. Their formation is shaped by education and professional training, green HRM practices, and institutional and regulatory mechanisms. Overall, green skills function as human, organizational, and institutional capacities that support ESG credibility, climate-risk assessment, sustainability disclosure, responsible capital allocation, and anti-greenwashing practices in the transition toward a sustainable bioeconomy.


  • Open Access

    Optimization of Leveler–Compactor Parameters in Combined Strip Tillage for Soil Preparation Under Plastic Film for Melon Crops

    by Yurii Syromiatnykov, Farmon Mamatov, Khayriddin Fayzullaev, Fakhridin Karshiev, Dustmurod Chuyanov, Eshpulat Eshdavlatov, Ibrat Ismailov, Isroil Temirov, Akmal Eshdavlatov, Laziz Gulomov, et al.

    Strip tillage combined with plastic film mulching is widely used to improve moisture conservation and crop productivity in arid and semi-arid regions; however, the quality of a prepared strip strongly depends on the secondary leveling and compaction of the loosened soil. The aim of this study was to substantiate the design and operating parameters of a skid-type leveler–compactor integrated into a combined machine for one-pass pre-sowing soil preparation of rainfed land with the simultaneous laying of drip irrigation hoses and plastic film for melon crops. The research combined theoretical modeling of soil–tool interaction with single-factor and multifactor field experiments and a two-year agronomic evaluation under farmer field conditions. The optimal parameter ranges were 24.0–26.0° for the lower compacting element, 151–155° for the upper leveling part, and 24.3–27.0 cm for the tool height. Under these conditions, the proposed system ensured a soil fraction < 25 mm of 87.2%, surface irregularities of 1.34 cm, and reduced fuel consumption, from 38.6 to 26.3 kg ha−1, compared with the conventional method. The field emergence increased to 91.6%, the total yield reached 50.7 t ha−1, and the water use efficiency increased to 17.4–18.9 kg m−3. The results demonstrate that optimization of the leveler–compactor significantly improves strip quality, agronomic performance, and resource use efficiency in melon production under plastic film.