Dilsabo Choriyeva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dilsabo Choriyeva has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Shahnoza Abduganiyeva
Department of Agricultural Techniques and Technologies, Faculty of Agricultural Engineering, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers National Research University, Tashkent 100000, Uzbekistan
3 shared publications - Sherzod Kurbanov
Department of General Technical Sciences, Karshi State Technical University, Karshi 180100, Uzbekistan
3 shared publications - Yurii Syromiatnykov
Institute of Soil and Plant Sciences, Latvia University of Life Sciences and Technologies, LV-3001 Jelgava, Latvia
3 shared publications - Azamat Safarov
Department of Agricultural Engineering, Karshi State Technical University, Karshi 180100, Uzbekistan
2 shared publications - Farmon Mamatov
Department of Agricultural Engineering, Karshi State Technical University, Karshi 180100, Uzbekistan
2 shared publications - Gayrat Otamurodov
Department of Agricultural Engineering, Karshi State Technical University, Karshi 180100, Uzbekistan
2 shared publications
Latest Publications
- Open Access
- 5 September 2026
- Published by MDPI AG in Agriengineering
- Vol. 8 (9) , 376
Design and Optimization of Soil-Engaging Components for Intelligent Seedbed Preparation in Water-Limited Cropping Systems: A Critical Review
Intelligent seedbed preparation requires more than an optimized soil-engaging component: field condition must be diagnosed, a controllable setting must be adjusted, and the resulting soil zone must be verified. This critical review synthesizes 132 unique sources across soil mechanics, component design, numerical modeling, field validation, and sensing-control research for water-limited cropping systems. Evidence was compared as bounded within-study contrasts rather than pooled effects because outcome definitions, soils, operating regimes, and validation scales differ. Four recurring conflicts organize the synthesis: fracture versus draft, tilth versus evaporative exposure, residue retention versus blockage, and immediate loosening versus persistence. Reported examples include an increase in the <50 mm aggregate fraction from 76.1% to 88.0%, a study-specific fragmentation index increase from 83.0% to 94.54%, a 43–47% reduction in penetration resistance after geometry-optimized loosening, and rainfall-dependent water-use-efficiency gains of 6.0–11.7% after subsoiling. These values are retained as study-specific anchors, not universal settings. The proposed framework adds value by linking four decision stages—field diagnosis, component design, controlled operation, and post-pass verification—while explicitly separating conventional optimization, monitored operation, and closed-loop intelligent control.
- 5 September 2026
- Published by MDPI AG in Agriengineering
- Vol. 8 (9) , 376
Open AccessDesign and Optimization of Soil-Engaging Components for Intelligent Seedbed Preparation in Water-Limited Cropping Systems: A Critical Review
Intelligent seedbed preparation requires more than an optimized soil-engaging component: field condition must be diagnosed, a controllable setting must be adjusted, and the resulting soil zone must be verified. This critical review synthesizes 132 unique sources across soil mechanics, component design, numerical modeling, field validation, and sensing-control research for water-limited cropping systems. Evidence was compared as bounded within-study contrasts rather than pooled effects because outcome definitions, soils, operating regimes, and validation scales differ. Four recurring conflicts organize the synthesis: fracture versus draft, tilth versus evaporative exposure, residue retention versus blockage, and immediate loosening versus persistence. Reported examples include an increase in the <50 mm aggregate fraction from 76.1% to 88.0%, a study-specific fragmentation index increase from 83.0% to 94.54%, a 43–47% reduction in penetration resistance after geometry-optimized loosening, and rainfall-dependent water-use-efficiency gains of 6.0–11.7% after subsoiling. These values are retained as study-specific anchors, not universal settings. The proposed framework adds value by linking four decision stages—field diagnosis, component design, controlled operation, and post-pass verification—while explicitly separating conventional optimization, monitored operation, and closed-loop intelligent control.
- Open Access
- 31 August 2026
- Published by MDPI AG in Preprints.org
Design and Optimization of Soil-Engaging Components for Intelligent Seedbed Preparation in Water-Limited Cropping Systems: A Critical Review
Intelligent seedbed preparation requires more than an optimized soil-engaging component: field condition must be diagnosed, a controllable setting must be adjusted, and the resulting soil zone must be verified. This critical review synthesizes 133 sources across soil mechanics, component design, numerical modeling, field validation, and sensing-control research for water-limited cropping systems. Evidence was compared as bounded within-study contrasts rather than pooled effects because outcome definitions, soils, operating regimes, and validation scales differ. Four recurring conflicts organize the synthesis: fracture versus draft, tilth versus evaporative exposure, residue retention versus blockage, and immediate loosening versus persistence. Reported examples include an increase in the <50-mm aggregate fraction from 76.1% to 88.0%, a study-specific fragmentation index increase from 83.0% to 94.54%, a 43–47% reduction in penetration resistance after geometry-optimized loosening, and rainfall-dependent water-use-efficiency gains of 6.0–11.7% after subsoiling. These values are retained as study-specific anchors, not universal settings. The proposed framework adds value by linking four decision stages—field diagnosis, component design, controlled operation, and post-pass verification—while explicitly separating conventional optimization, monitored operation, and closed-loop intelligent control.
- 31 August 2026
- Published by MDPI AG in Preprints.org
Open AccessDesign and Optimization of Soil-Engaging Components for Intelligent Seedbed Preparation in Water-Limited Cropping Systems: A Critical Review
Intelligent seedbed preparation requires more than an optimized soil-engaging component: field condition must be diagnosed, a controllable setting must be adjusted, and the resulting soil zone must be verified. This critical review synthesizes 133 sources across soil mechanics, component design, numerical modeling, field validation, and sensing-control research for water-limited cropping systems. Evidence was compared as bounded within-study contrasts rather than pooled effects because outcome definitions, soils, operating regimes, and validation scales differ. Four recurring conflicts organize the synthesis: fracture versus draft, tilth versus evaporative exposure, residue retention versus blockage, and immediate loosening versus persistence. Reported examples include an increase in the <50-mm aggregate fraction from 76.1% to 88.0%, a study-specific fragmentation index increase from 83.0% to 94.54%, a 43–47% reduction in penetration resistance after geometry-optimized loosening, and rainfall-dependent water-use-efficiency gains of 6.0–11.7% after subsoiling. These values are retained as study-specific anchors, not universal settings. The proposed framework adds value by linking four decision stages—field diagnosis, component design, controlled operation, and post-pass verification—while explicitly separating conventional optimization, monitored operation, and closed-loop intelligent control.
- Open Access
- 7 June 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (12) , 1260
Soil Fragmentation, Surface Roughness and Draft Force in Chisel Tillage with a Toothed Roller: Experimental and Analytical Study
Efficient seedbed preparation under conservation-oriented tillage requires balanced aggregate fragmentation, surface microrelief and energy demand. This study investigated the influence of passive toothed roller parameters on soil fragmentation, surface roughness, draft force and fuel consumption during chisel tillage under medium-loam Calcisol conditions. Three configurations were compared: a chisel plow without a roller, with a slat roller and with a toothed roller. An analytical framework describing aggregate capture, tooth–soil contact frequency and resistance formation was combined with field experiments and regression-based response surface analysis. The toothed roller improved measured soil treatment indicators compared with the no-roller and slat-roller configurations due to discrete tooth–soil interaction, localized stress concentration and repeated loading of loosened aggregates. Rational parameter ranges were identified: a roller diameter of 0.45–0.46 m, 13–15 teeth, transverse spacing of 8.0–8.6 cm, a tooth height of 7.5–8.5 cm and specific load of 0.9–1.1 kN m−1. Under the selected configuration, aggregates smaller than 50 mm increased from 76.1% to 88.0%, surface roughness decreased from 6.8 to 3.7 cm and residue retention remained above 60%. Fuel consumption increased to 28.4–28.5 L ha−1, reflecting the additional energetic cost of fragmentation and levelling. The approach supports rational selection of passive toothed roller parameters under the tested conditions.
- 7 June 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (12) , 1260
Open AccessSoil Fragmentation, Surface Roughness and Draft Force in Chisel Tillage with a Toothed Roller: Experimental and Analytical Study
Efficient seedbed preparation under conservation-oriented tillage requires balanced aggregate fragmentation, surface microrelief and energy demand. This study investigated the influence of passive toothed roller parameters on soil fragmentation, surface roughness, draft force and fuel consumption during chisel tillage under medium-loam Calcisol conditions. Three configurations were compared: a chisel plow without a roller, with a slat roller and with a toothed roller. An analytical framework describing aggregate capture, tooth–soil contact frequency and resistance formation was combined with field experiments and regression-based response surface analysis. The toothed roller improved measured soil treatment indicators compared with the no-roller and slat-roller configurations due to discrete tooth–soil interaction, localized stress concentration and repeated loading of loosened aggregates. Rational parameter ranges were identified: a roller diameter of 0.45–0.46 m, 13–15 teeth, transverse spacing of 8.0–8.6 cm, a tooth height of 7.5–8.5 cm and specific load of 0.9–1.1 kN m−1. Under the selected configuration, aggregates smaller than 50 mm increased from 76.1% to 88.0%, surface roughness decreased from 6.8 to 3.7 cm and residue retention remained above 60%. Fuel consumption increased to 28.4–28.5 L ha−1, reflecting the additional energetic cost of fragmentation and levelling. The approach supports rational selection of passive toothed roller parameters under the tested conditions.