Improved adhesion between polyurethane and SBR rubber treated with trichloroisocyanuric acid solutions containing different concentrations of chlorine
Authors:
- María D. Romero-SánchezMRMaría D. Romero-Sánchez
- M. Mercedes Pastor-BlasMPM. Mercedes Pastor-Blas
- José Miguel Martín-MartínezJosé Miguel Martín-Martínez
- 1 January 2003
- journal article
- Published by Taylor & Francis in Composite Interfaces
- Vol. 10 (1) , 77-94
Abstract
The chlorine concentration in trichloroisocyanuric acid (TCI) solutions depended on the solvent used to apply the chlorination agent on the rubber surface and on the time after preparation of the solutions. In this study, methyl ethyl ketone (MEK) and ethyl acetate (EA) have been used as solvents for 2 wt% TCI in the treatment of a difficult-to-bond synthetic vulcanized styrene-butadiene rubber (R2 rubber). Chlorination produced improved wettability of the R2 rubber and also the removal of paraffin wax from the surface. Furthermore, several C Cl and C O moieties are produced, and some microroughness was created. The concentration of chlorine in the 2 wt% TCI/MEK solution decreased by increasing the time after preparation, and the effects due to chlorination became less marked by increasing the time. However, the concentration of chlorine in the 2 wt% TCI/EA solution was higher and was not noticeably decreased by increasing the time after preparation, and noticeable surface modifications were produced on the R2 rubber treated with the chlorinating solution 6 weeks after preparation. The improved surface modifications of R2 rubber allowed an increase in adhesion to polyurethane adhesive, and the failure was cohesive in the chlorinated layer. A relationship between the chlorine concentration in the TCI solution and the peel strength value in treated R2 rubber/polyurethane adhesive joint was obtained.Keywords
This publication has 18 references indexed in Scilit:
- Macromolecular modification of EPDM: Wettability, miscibility, and morphology studyJournal of Applied Polymer Science, 2001
- Surface Characterization of Vulcanized Rubber Treated with Sulfuric Acid and its Adhesion to Polyurethane AdhesiveThe Journal of Adhesion, 2000
- Chlorination of vulcanized styrene-butadiene rubber using solutions of trichloroisocyanuric acid in different solventsJournal of Adhesion Science and Technology, 2000
- Plasma modification of polymer surfaces for adhesion improvementIBM Journal of Research and Development, 1994
- Bonding of Vulcanized Elastomers for Underwater UseThe Journal of Adhesion, 1992
- Halogenation of styrene-butadiene rubber to improve its adhesion to polyurethanesJournal of Adhesion Science and Technology, 1991
- The investigation of structural and morphological changes after the chlorination of rubber surfacesDie Angewandte Makromolekulare Chemie, 1990
- Contact Angle and Spectroscopic Studies of Chlorinated and Unchlorinated Natural Rubber SurfacesRubber Chemistry and Technology, 1988
- Surface Modification of Elastomers for BondingThe Journal of Adhesion, 1983
- Behaviour of Urethane Adhesives on Rubber SurfacesThe Journal of Adhesion, 1973