Investigation of Static Strain Aging Behaviour of AISI 304 Austenitic Stainless Steel
Open Access
- 15 June 2022
- journal article
- research article
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 12 (1) , 340-354
Abstract
In this study, the change in the material's mechanical properties by the static strain ageing process after the pre-deformation applied to AISI 304 austenitic stainless steel was investigated and analysed. The samples were first applied to 5% pre-deformation and then annealed in the oven at 150°C, 250°C, 400°C and 550°C in separate groups for 30 and 60 minutes. The data obtained by performing hardness and tensile tests after static strain ageing were compared, and the interaction between test parameters and these parameters was investigated by performing Pareto analysis. As a result of the study, the highest tensile strength and hardness values were observed in the samples applied static strain ageing for 60 minutes at 150°C. The yield and tensile strengths of the as-received material increased by 10% with the ageing process. It was determined that these values decreased from 400°C. In addition, as a result of Pareto analysis, it was determined that the temperature value is the most critical parameter affecting the results.Keywords
Funding Information
- Giresun University (FEN-BAP-A-230218-17)
This publication has 12 references indexed in Scilit:
- Dynamic strain aging mechanisms in a metastable austenitic stainless steelActa Materialia, 2021
- SADE KARBONLU TOZ METAL BİR ÇELİĞİN ÇEKME DAYANIMINA STATİK DEFORMASYON YAŞLANMA İŞLEMİNİN ETKİLERİNİN ARAŞTIRILMASIGazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2020
- Strain-Ageing of Low-Alloyed Multiphase High-Strength SteelsMetals, 2020
- Development of constitutive models for dynamic strain aging regime in Austenitic stainless steel 304Materials & Design (1980-2015), 2013
- Hardening Behavior of a 304 Stainless Steel Containing Deformation-Induced Martensite during Static Strain AgingMATERIALS TRANSACTIONS, 2009
- Static and Dynamic Strain Aging at High Temperatures in 304 Stainless SteelISIJ International, 2004
- Mechanical, electrochemical and tribological properties of nano-crystalline surface of 304 stainless steelWear, 2003
- Formation of the cottrell atmosphere during strain aging of bake-hardenable steelsMetallurgical and Materials Transactions A, 2001
- Mechanical metallurgy.1961
- Dislocation Theory of Yielding and Strain Ageing of IronProceedings of the Physical Society. Section A, 1949