Error analysis of precision measurement with monocular vision
- 22 November 2023
- journal article
- research article
- Published by IOP Publishing in Engineering Research Express
- Vol. 5 (4) , 045066
Abstract
To systematically study the measurement error of the calibration coefficient method when the camera’s optical axis is not perpendicular to the measurement plane, this paper first discusses the principle of error measurement with 2D imaging model, and then derives the distribution relationship of physical points corresponding to evenly distributed pixels in the pixel coordinate system based on the projection transformation matrix of the vision system. Theoretical analysis reveals an equivariance series in the expression of physical point intervals. Considering rotational symmetry of the coordinate axis, this paper analyzes the geometric relationship when the calibration plane rotates around the X axis and derives the mathematical expression for dimensional measurement. Finally, an experimental platform with both industrial and telecentric lenses is proposed and designed. Experimental results demonstrate that the measurement results of the expression derived in this paper are consistent with the traditional coordinate transformation method and the maximum deviation of the measurement is less than 0.06 mm, validating the theoretical analysis presented in this paper and providing theoretical guidance for subsequent practical application.Keywords
Funding Information
- Beijing Science and Technology Planning Project, China (Z221100005822012)
- Key Technologies Research and Development Program of China (2021YFB3202403)
This publication has 28 references indexed in Scilit:
- High-accuracy multi-camera reconstruction enhanced by adaptive point cloud correction algorithmOptics and Lasers in Engineering, 2019
- Binocular vision-based 3D method for detecting high dynamic and wide-range contouring errors of CNC machine toolsMeasurement Science and Technology, 2019
- Robust Inter-Vehicle Distance Estimation Method Based on Monocular VisionIEEE Access, 2019
- Dual-arm cooperation and implementing for robotic harvesting tomato using binocular visionRobotics and Autonomous Systems, 2019
- Measurement method of screw thread geometric error based on machine visionMeasurement and Control, 2018
- Size measurement based on a two-camera machine vision system for the bayonets of automobile brake padsMeasurement, 2018
- Global calibration of multi-cameras with non-overlapping fields of view based on photogrammetry and reconfigurable targetMeasurement Science and Technology, 2018
- Comparative assessment of techniques for initial pose estimation using monocular visionActa Astronautica, 2016
- Measurement error analysis and accuracy enhancement of 2D vision system for robotic drillingRobotics and Computer-Integrated Manufacturing, 2014
- 6DoF object pose measurement by a monocular manifold-based pattern recognition techniqueMeasurement Science and Technology, 2012