Interfacial microstructure and mechanical properties of Si3N4/Invar joints using Ag–Cu–In–Ti with Cu foil as an interlayer
- 11 January 2024
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 66 (2) , 207-214
Abstract
Si3N4 and Invar alloy brazed joints were achieved using two types of Ag-based interlayers: a Ag–Cu–In–Ti foil and a Ag–Cu–In–Ti/Cu/Ag–Cu multi-interlayer. The results showed that when only using a single Ag–Cu–In–Ti filler, the wave-shaped Fe2Ti + Ni3Ti intermetallic compounds are concentrated in the middle of the brazing seam. When adding Cu as the interlayer, the dissolution of the Cu interlayer formed a large number of Cu(s,s) blocks of different sizes in the brazing seam, which hindered the concentrated distribution of Fe2Ti + Ni3Ti intermetallic compounds in the brazing seam. As a result, Fe2Ti and Ni3Ti were dispersedly distributed in the brazing seam, increasing the shear strength of the brazed joint. The shear strength of brazed joints was increased by 82 % compared to joints brazed with a single Ag–Cu–In–Ti filler when the Cu interlayer was added.Keywords
This publication has 21 references indexed in Scilit:
- Relief of residual stress in Al2O3/Nb joints brazed with Ag-Cu-Ti/Cu/Ag-Cu-Ti composite interlayerArchives of Civil and Mechanical Engineering, 2019
- Interfacial Microstructure and Properties of Si3N4 Ceramics/Cu/304 Stainless Steel Brazed by Ti40Zr25B0.2Cu Amorphous SolderMaterials, 2018
- Microstructure and brazing mechanism of porous Si 3 N 4 /Invar joint brazed with Ag-Cu-Ti/Cu/Ag-Cu multi-layered fillerJournal of Materials Science & Technology, 2018
- Microstructure and mechanical properties of BN-Si3N4 and AlON joints brazed with Ag-Cu-Ti filler alloyJournal of the European Ceramic Society, 2018
- Microstructure and mechanical properties of porous Si3N4/Invar joints brazed with Ag-Cu-Ti+Mo/Cu/Ag-Cu multi-layered composite fillerCeramics International, 2017
- Microstructural evolution of Si 3 N 4 /Ti6Al4V joints brazed with nano-Si 3 N 4 reinforced AgCuTi composite fillerVacuum, 2017
- Joining of SiO2f/SiO2 composite to Ti-6Al-4V using Ag-Cu-In-Ti brazing fillers, the joint strengths, and microstructuresWelding in the World, 2017
- Active Metal Brazing of Machinable Aluminum Nitride-Based Ceramic to Stainless SteelJournal of Materials Engineering and Performance, 2012
- Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperaturesMaterials Science and Engineering: A, 2010
- Advanced Ceramic Materials for High Temperature ApplicationsAdvanced Engineering Materials, 2006