Effects of Curing Time and Fly Ash Content on Properties of Stabilized Dredged Material
- 1 October 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 29 (10)
Abstract
Properties of raw dredged material (RDM) stabilized with self-cementing Class C fly ash (FA) were evaluated for beneficial use in geotechnical construction applications. Emphasis was placed on evaluating effects of curing time and fly ash content on index and engineering properties relevant to pavement construction. RDM samples were blended with 10, 20, and 30% FA and cured for 2 h, 7 days, and 28 days. Fly ash stabilization reduced plasticity and improved the engineering properties of the stabilized dredged material (SDM). Increasing FA content increased maximum dry unit weight and reduced optimum water content for compaction. Unconfined compressive strength ( ) increased with FA content and curing time. The effect of curing time on was more significant at higher FA content. Freeze-thaw cycles only reduced the strength of SDM specimens by 5% on average, indicating that SDM was durable to freeze-thaw. Analytical relationships were developed to predict Atterberg limits and of SDM at different fly ash contents and curing times. The California bearing ratio (CBR) for the SDM ranged from 10 to 20, which is comparable to compacted silty sand or sand and rates as fair to good for pavement subgrade. The resilient modulus ( ) increased significantly with FA content and varied between 35 and 83 MPa, which is comparable to gravel or crushed stone and rates as good to excellent for subgrade. Results indicate that low-strength dredged materials stabilized with Class C fly ash are viable for beneficial use as pavement subgrade material.
Keywords
This publication has 15 references indexed in Scilit:
- Dredged marine sand as construction materialEuropean Journal of Environmental and Civil Engineering, 2012
- Stabilization of Organic Soils with Fly AshJournal of Geotechnical and Geoenvironmental Engineering, 2011
- Stabilized Dredged Material. II: Geomechanical BehaviorJournal of Geotechnical and Geoenvironmental Engineering, 2010
- Stabilized Dredged Material. I: Parametric StudyJournal of Geotechnical and Geoenvironmental Engineering, 2010
- The long-term performance of two fly ash stabilized fine-grained soil subbasesResources, Conservation and Recycling, 2010
- Role of Fly Ash on Strength and Microstructure Development in Blended Cement Stabilized Silty ClaySoils and Foundations, 2009
- Field Evaluation of Crushed Glass–Dredged Material BlendsJournal of Geotechnical and Geoenvironmental Engineering, 2006
- Stabilizing Soft Fine-Grained Soils with Fly AshJournal of Materials in Civil Engineering, 2006
- Soft subgrades’ stabilization by using various fly ashesResources, Conservation and Recycling, 2006
- Effect of Fly Ash on Engineering Properties of Expansive SoilsJournal of Geotechnical and Geoenvironmental Engineering, 2004