High Strength Inflatable Pouch Anchors
- 19 March 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 5 (3) , 3761-3767
Abstract
Anchoring is an important capability for mobile robots, either to conserve power, survey an area, or deploy a payload. However, the careful placement of an anchor in unstructured environments requires a great deal of dexterity, perception, and planning. Furthermore, many of the reversible adhesives that may be used for anchoring are surface-dependent. We introduce inflatable pouch anchors as a versatile, low-power, and easy-to-position technology for anchoring in natural surfaces. By using negative space such as gaps and cracks with a flexible pouch, the challenge of placing an anchor is greatly simplified. We used a compressed ${\rm{CO_{2}}$ canister to supply pressure, and a three-way normally-closed valve to allow for multiple uses. We tested the anchor with high friction interfaces such as microspines and gecko-inspired adhesives. We validated the performance with tests on smooth surfaces, sandpaper, manufactured rock, and natural rock surfaces. The 425 g anchor actuated at an internal pressure of 105 kPa held over 700 N when anchored in natural rock with a microspine interface.
Keywords
Funding Information
- Office of Naval Research (N00014-18-1-2277)
- NASA Space Technology Research Fellowship
This publication has 32 references indexed in Scilit:
- Learning hand-eye coordination for robotic grasping with deep learning and large-scale data collectionThe International Journal of Robotics Research, 2017
- Design, fabrication and control of soft robotsNature, 2015
- Improving controllable adhesion on both rough and smooth surfaces with a hybrid electrostatic/gecko-like adhesiveJournal of The Royal Society Interface, 2014
- Robotic Tentacles with Three‐Dimensional Mobility Based on Flexible ElastomersAdvanced Materials, 2012
- Soft Robot Arm Inspired by the OctopusAdvanced Robotics, 2012
- A microfabricated wedge-shaped adhesive array displaying gecko-like dynamic adhesion, directionality and long lifetimeJournal of The Royal Society Interface, 2009
- Biologically inspired climbing with a hexapedal robotJournal of Field Robotics, 2008
- The First Takeoff of a Biologically Inspired At-Scale Robotic InsectIEEE Transactions on Robotics, 2008
- Scaling Hard Vertical Surfaces with Compliant Microspine ArraysThe International Journal of Robotics Research, 2006
- Connectors for self-reconfiguring robotsIEEE/ASME Transactions on Mechatronics, 2002