Performance Analysis of Linear Variable Reluctance Resolvers Based on an Improved Winding Function Approach
- 8 March 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 33 (3) , 1422-1430
Abstract
Linear Variable Reluctance (LVR) resolvers have substantial benefits that make them suitable for linear motion control drives. The optimal design of LVR resolvers needs an accurate modelling that is usually achieved by three-dimensional (3-D) time stepping finite element method (TSFEM). However, 3-D TSFEM is very time consuming method and is unsuitable for co-usage with optimization algorithms. So, in this paper an accurate analytical model based on improved winding function (IWF) method is proposed. The proposed model is used to calculate the inductances, air-gap flux density, induced voltages and linear position error. The distinguished feature of the proposed model is direct usage of the turn function in calculating the inductances. While, the conventional modified winding function (MWF) method uses the Fourier Seri of the turn function. So, the proposed model is much faster and more accurate than the models based on conventional MWF method. The results of the proposed model are verified with those of 3-D TSFEM. Then, the proposed model is used for design optimization of the sensor. Also, two methods are proposed for compensating the longitudinal end effect. Finally, the experimental prototype is used to evaluate the developed analytical model and the optimization process.Keywords
Funding Information
- Research Office of Sharif University of Technology and Niroo Research Institute
This publication has 19 references indexed in Scilit:
- Analytical model for performance prediction of linear resolverIET Electric Power Applications, 2017
- Twelve‐slot two‐saliency variable reluctance resolver with non‐overlapping signal windings and axial flux excitationIET Electric Power Applications, 2017
- Design oriented technique for mitigating position error due to shaft run‐out in sinusoidal‐rotor variable reluctance resolversIET Electric Power Applications, 2017
- Effects of Physical Parameters on the Accuracy of Axial Flux ResolversIEEE Transactions on Magnetics, 2016
- Design, Analysis, and Prototyping of a New Wound-Rotor Axial Flux Brushless ResolverIEEE Transactions on Energy Conversion, 2016
- Design, Performance, and Testing of a Brushless Axial Flux Resolver Without Rotor WindingsIEEE Sensors Journal, 2016
- A Novel Variable Reluctance Resolver for HEV/EV ApplicationsIEEE Transactions on Industry Applications, 2016
- A Novel Design of Rotor Contour for Variable Reluctance Resolver by Injecting Auxiliary Air-Gap Permeance HarmonicsIEEE Transactions on Energy Conversion, 2015
- Axial Flux Resolver Design Techniques for Minimizing Position Error Due to Static EccentricitiesIEEE Sensors Journal, 2015
- A Novel Variable Reluctance Resolver with Nonoverlapping Tooth–Coil WindingsIEEE Transactions on Energy Conversion, 2014