Elemental composition, corrosion resistance and mechanical properties of computer-aided design and computer-aided manufacturing fixed retainers versus conventional fixed retainers
Authors:
Open Access
- 1 January 2024
- journal article
- research article
- Published by Nihon University School of Dentistry in Journal of Oral Science
- Vol. 66 (2) , 107-110
Abstract
Purpose: To investigate the elemental composition, corrosion resistance, and mechanical properties of computer-aided design and computer-aided manufacturing (CAD-CAM) retainers versus conventional fixed retainers (FRs).Methods: Eight different retainer wires were investigated. Energy dispersive X-ray spectroscopy was used to determine the elemental composition. Leakage was analysed according to ISO 10271:2020 guidelines. Hardness was tested using the Vickers method with a load of 0.3 kg. The tensile force and tensile strength were evaluated. Multiple comparisons among wires of hardness, tensile force, and strength were conducted using the Welch t-test, with Bonferroni correction.Results: Nickel was present in all wires. The CAD-CAM-FR wire, which contained more nickel than the other wires, had no measurable leakage. The gold-plated wires had the highest total leakage, but did not exceed the ISO standard limit. The hardness of the stainless-steel twisted wires was the highest and that of the CAD-CAM-FR wire was the lowest. The tensile strength of the CAD-CAM-FR wire was significantly lower than that of the other wires and similar to the other twisted-wire retainers.Conclusion: The CAD-CAM-FR wire is likely to have high corrosion resistance and flexibility due to its low hardness.Keywords
Funding Information
- Nihon University
This publication has 22 references indexed in Scilit:
- Evaluation of tensile strength and surface topography of orthodontic wires after infection control procedures: An in vitro studyJournal of Pharmacy and Bioallied Sciences, 2014
- Investigation of the freely available easy-to-use software ‘EZR’ for medical statisticsBone Marrow Transplantation, 2012
- Comparison of three different orthodontic wires for bonded lingual retainer fabricationThe Korean Journal of Orthodontics, 2012
- Long-term effectiveness of canine-to-canine bonded flexible spiral wire lingual retainersAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2011
- Influence of different brazing and welding methods on tensile strength and microhardness of orthodontic stainless steel wireEuropean Journal of Orthodontics, 2008
- Corrosion resistance of stressed NiTi and stainless steel orthodontic wires in acid artificial salivaJournal of Biomedical Materials Research Part A, 2003
- Breakage Incidence with Direct Bonded Lingual RetainersBritish Journal of Orthodontics, 1999
- Influence of Composition and Purity on Tensile Properties of Ni-Ti Alloy CastingsDental Materials Journal, 1992
- Super-Elasticity and Thermal Behavior of Ni-Ti Alloy Orthodontic Arch WiresDental Materials Journal, 1992
- Clinical experience with direct-bonded orthodontic retainersAmerican Journal of Orthodontics, 1977