Experimental study of bubble flow dynamics in an asymmetric hierarchical porous structure
- 1 February 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Abstract
Porous media have been widely used for liquid–gas separation, benefiting from the strong capillary force generated by micro/nanoscale pores. Understanding the flow characteristics at the pore scale is important for the design of porous structures. In this study, the flow mechanisms of an isolated bubble in an asymmetric hierarchical pore were investigated by high-speed flow visualization and microscopic particle image velocimetry (Micro-PIV). The influence of the hierarchical pore on the flow field in the liquid and the dynamics of bubble penetration was investigated using isopropyl alcohol as the test liquid and polydimethylsiloxane micromodels. The critical pressure for the bubble to break through the pore was determined. The results show that the presence of secondary microstructure can increase the critical bubble point pressure by 79.7%. Meanwhile, the attack angle of the microstructure affects the critical pressure differently by changing the pinning effect, the curvature of the bubble as well as the flow field. The results of this work could provide guidance for optimizing the design of porous media for efficient gas–liquid separation.Keywords
Funding Information
- National Natural Science Foundation of China (52276013)
- Natural Science Foundation of Shanghai Municipality (22ZR1434300)
This publication has 41 references indexed in Scilit:
- Data-driven methods for flow and transport in porous media: A reviewInternational Journal of Heat and Mass Transfer, 2024
- Phase Separation in Porous Media Integrated Capillary ChannelsMicrogravity Science and Technology, 2020
- Manufacturing a Micro-model with Integrated Fibre Optic Pressure SensorsTransport in Porous Media, 2018
- Directional and Continuous Transport of Gas Bubbles on Superaerophilic Geometry‐Gradient Surfaces in Aqueous EnvironmentsAdvanced Functional Materials, 2017
- An approach to model three‐phase flow coupling during steam chamber riseThe Canadian Journal of Chemical Engineering, 2013
- On the fabrication of PDMS micromodels by rapid prototyping, and their use in two‐phase flow studiesWater Resources Research, 2013
- Two-phase flow characteristics in multiple orifice valvesExperimental Thermal and Fluid Science, 2010
- Multiple emulsions for food useCurrent Opinion in Colloid & Interface Science, 2007
- Resistance to spreading of liquids by sharp edged microstepsColloids and Surfaces, 1982
- Resistance to spreading of liquids by sharp edgesJournal of Colloid and Interface Science, 1977