Experimental Analysis and Mathematical Model of FSW Parameter Effects on the Corrosion Rate of Al 6061-T6-Cu C11000 Joints
Authors:
- Félix Alan Montes-GonzálezFMFélix Alan Montes-González
- Nelly Abigaíl Rodríguez-RosalesNRNelly Abigaíl Rodríguez-Rosales
- Juan Carlos Ortiz-CuellarJOJuan Carlos Ortiz-Cuellar
- Carlos Rodrigo Muñiz-ValdezCarlos Rodrigo Muñiz-Valdez
- Josué Gómez-CasasJGJosué Gómez-Casas
- Jesús Salvador Galindo-ValdésJesús Salvador Galindo-Valdés
- Oziel Gómez-CasasOGOziel Gómez-Casas
Open Access
Abstract
Friction stir welding is characterized as an ecological and low-cost process in comparison to traditional welding techniques, and due to its application in the solid state, it is a feasible option for joining similar and/or dissimilar materials. The present investigation seeks to determine the effect of friction stir welding’s parameters on the corrosion resistance of an Al 6061-T6–Cu C11000 dissimilar joint, with mathematical analysis to validate the results. After the welding process, the samples were exposed to a NaCl solution in an electrochemical cell to determine the corrosion rate via potentiodynamic tests. Microstructural characterization revealed a laminar structure, composed of aluminum and copper, as well as copper particles and the formation of intermetallic compounds distributed in the weld zone. The potentiodynamic tests showed that the corrosion rate increased with the rotational and traverse speeds. The mathematical model quantifies the relationship between corrosion rate and rotational and traverse speeds.Keywords
This publication has 55 references indexed in Scilit:
- Corrosion Study and Intermetallics Formation in Gold and Copper Wire Bonding in Microelectronics PackagingCrystals, 2013
- Formation and distribution of brittle structures in friction stir welding of aluminium and copper: Influence of shoulder geometryIntermetallics, 2012
- A combined approach to microstructure mapping of an Al–Li AA2199 friction stir weldActa Materialia, 2011
- Effect of Excess Silicon and Small Copper Content on Intergranular Corrosion of 6000-Series Aluminum AlloysJournal of the Electrochemical Society, 2010
- Corrosion mechanism associated with T1 and T2 precipitates of Al–Cu–Li alloys in NaCl solutionJournal of Alloys and Compounds, 2008
- A study on the corrosion behavior of aluminum alloys in seawaterMaterials & Design (1980-2015), 2008
- Electrochemical Characteristics of Intermetallic Phases in Aluminum AlloysJournal of the Electrochemical Society, 2005
- The joint properties of dissimilar formed Al alloys by friction stir welding according to the fixed location of materialsScripta Materialia, 2003
- Effect of solution heat treatment on galvanic coupling between intermetallics and matrix in AA7075-T6Corrosion Science, 2003
- Bonding in MgSi and Al-Mg-Si compounds relevant to Al-Mg-Si alloysPhysical Review B, 2003