A Sensor Based on a Spherical Parallel Mechanism for the Measurement of Fluid Velocity: Experimental Development
Open Access
- 31 January 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 16145-16154
Abstract
In this paper, an experimental demonstration was developed, to measure the velocity of a fluid by using a sensor based on the spherical parallel mechanism with three degrees-of-freedom. This sensor transforms the kinetic energy of the fluid into potential energy by deforming the parallel mechanism. This deformation is due to the impact of the fluid on a sphere attached to the platform of the parallel mechanism. Through the acquisition of data from an inertial measurement unit in the sphere, an algorithm calculates the velocity and direction of the fluid. The mathematic model and algorithm of the velocity measurement was developed in a previous article. This paper built and tested the sensor with the objective of demonstrating the theoretical basis for the sensor. The experiment is based on the underwater movement of the sensor in a linear way along a rail. The velocity that is measured by the linear encoder is equal to the fluid's relative velocity that is measured by the sensor. The measurements taken by the encoder and the sensor were compared in three experiments. The results show that the two measurements were similar, demonstrating that the sensor can accurately measure the velocity of the fluid.Keywords
Funding Information
- Spanish Government Projects (DPI2014-57220-C2-1-P)
- Universidad Politécnica de Madrid Project (AL14-PID-15)
- RoboCity2030-III-CM project (S2013/MIT-2748)
- RoboCity2030-DIH-CM (P2018/NMT-4331)
- Comunidad de Madrid
- Structural Funds of the EU
This publication has 14 references indexed in Scilit:
- High-precision underwater navigation using model-referenced pose estimation with monocular vision2016
- Experimental evaluation of hydroacoustic instruments for ROV navigation along aquaculture net pensAquacultural Engineering, 2016
- Understanding Geometric Algebra2015
- Dynamic modeling of variable ballast tank for spherical underwater robot2013
- Particle filter ROV navigation using hydroacoustic position and speed log measurements2012
- Concepción, Desarrollo y Avances en el Control de Navegación de Robots Submarinos Paralelos: El Robot Remo-IRevista Iberoamericana de Automática e Informática Industrial, 2009
- Rigid Body Dynamics Algorithms2008
- Performance evaluation of spherical parallel platforms for humanoid robotsRobotica, 2006
- The Optimum Kinematic Design of a Spherical Three-Degree-of-Freedom Parallel ManipulatorJournal of Mechanical Design, 1989
- A Platform with Six Degrees of FreedomProceedings of the Institution of Mechanical Engineers, 1965