Pull-Out Performance of Rapid-Setting Sulphoaluminate Cement Grout for High-Strength Threaded Anchors in Water-Rich Sandy-Pebble Strata
Open Access
- 18 September 2026
- journal article
- research article
- Published by MDPI AG in Construction Materials
- Vol. 6 (5) , 69
Abstract
Anchors constructed in water-rich sandy-pebble strata require grout systems that can maintain material continuity and transfer tensile force effectively before groundwater-related disturbance weakens the borehole interface. This study investigated a sulphoaluminate cement-based rapid-setting grout (SAC) for PSB high-strength threaded anchors, using an ordinary Portland cement-based grout (OPC) as a reference material. Laboratory central pull-out tests were first conducted on grout cube specimens with different steel-bar diameters and bonded lengths to evaluate the steel–grout bond response. Full-scale field pull-out tests were then performed to examine the anchor–grout–ground response under water-rich ground conditions. LS-DYNA finite element models were calibrated against the laboratory and field results to interpret the governing load-transfer mechanism and to assess the influence of representative stratum resistance. The laboratory tests showed that the steel–grout bond response depended on both interfacial degradation and mortar splitting, indicating that peak bond strength should be interpreted together with failure mode and slip development. In the field tests, all anchors failed by pull-out, and the steel bar and grout body were pulled out together, showing that the full-scale response was governed mainly by the grout–ground interface rather than by steel–grout debonding. The calibrated numerical models reproduced the main load–displacement trends and supported a scale-dependent transition from steel–grout bond control at material scale to grout–ground interface control at field scale. The results provide a basis for evaluating rapid-setting grouts for high-strength anchors in water-rich sandy-pebble ground.Keywords
Funding Information
- China MCC5 Group Key Research and Development Special Program (WY2024B001)
This publication has 33 references indexed in Scilit:
- Effects of sodium sulfate and potassium sulfate on the properties of calcium sulfoaluminate (CSA) cement based grouting materialsConstruction and Building Materials, 2022
- Study on shear behavior and damage constitutive model of tendon-grout interfaceConstruction and Building Materials, 2022
- Experimental study on bond behavior between high-strength grout and deformed steel barsConstruction and Building Materials, 2021
- Experimental-numerical investigation on grout diffusion and washout in rough rock fractures under flowing waterComputers and Geotechnics, 2020
- Reinforcement simulation of water-rich and broken rock with Portland cement-based groutConstruction and Building Materials, 2019
- Alternative cement clinkersCement and Concrete Research, 2018
- Development of two new anti-washout grouting materials using multi-way ANOVA in conjunction with grey relational analysisConstruction and Building Materials, 2017
- Bond mechanism and bond strength of GFRP bars to concrete: A reviewComposites Part B: Engineering, 2016
- Bond of cement grouted reinforcing bars under constant radial pressureCement and Concrete Composites, 2005
- The effect of rock mass confinement on the bond strength of fully grouted cable boltsInternational Journal of Rock Mechanics and Mining Sciences, 1992