DRDongxing Ren

Dongxing Ren

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dongxing Ren has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fresh-State Properties and Machine-Learning Prediction of Sulfoaluminate Cement Grout for Water-Rich Tunnels

    by Tao Peng, Dongxing Ren, Binjia Li, Peng Xue, Hongye Liao, Yang Li

    This study investigated sulfoaluminate cement grout intended for water-rich tunnel applications and developed machine-learning models for predicting its fresh-state properties. The experimental programme included a 31-mixture base series varying the water-to-binder ratio, Class F fly ash, steel slag, and polycarboxylate ether (PCE) superplasticizer dosage; a hydroxyethyl cellulose (HEC)-modified series with a fixed binder composition; and a static-water turbidity series used to evaluate particle dispersion resistance. Flowability, setting time, compressive strength, and turbidity were measured. The results showed that the water-to-binder ratio, fly ash, steel slag, PCE, and HEC affected the balance between workability, setting behaviour, strength development, and static-water dispersion resistance. Increasing the HEC dosage from 0.004 to 0.006 reduced turbidity by 84.1–94.7% under static-water conditions, whereas an HEC dosage of 0.007 reduced the 7 and 28 d compressive strengths by 51.5% and 40.7%, respectively. Machine-learning models trained on the 31-mixture HEC-free dataset provided exploratory predictions of flowability and initial and final setting times. Extra Trees, support vector regression, and Extra Trees gave the lowest nested leave-one-out cross-validation (LOOCV) errors for flowability, initial setting time, and final setting time, with R2 values of 0.819, 0.743, and 0.767, respectively. Shapley Additive Explanations (SHAP) analysis indicated that the water-to-binder ratio dominated flowability prediction, whereas fly ash contributed strongly to setting-time prediction. The results provide complementary experimental and data-driven evidence for comparing sulfoaluminate cement grout formulations within the investigated composition domain.

  • Open Access

    Pull-Out Performance of Rapid-Setting Sulphoaluminate Cement Grout for High-Strength Threaded Anchors in Water-Rich Sandy-Pebble Strata

    by Tao Peng, Dongxing Ren, Binjia Li, Peng Xue, Hai Huang, Yang Li

    Anchors constructed in water-rich sandy-pebble strata require grout systems that can maintain material continuity and transfer tensile force effectively before groundwater-related disturbance weakens the borehole interface. This study investigated a sulphoaluminate cement-based rapid-setting grout (SAC) for PSB high-strength threaded anchors, using an ordinary Portland cement-based grout (OPC) as a reference material. Laboratory central pull-out tests were first conducted on grout cube specimens with different steel-bar diameters and bonded lengths to evaluate the steel–grout bond response. Full-scale field pull-out tests were then performed to examine the anchor–grout–ground response under water-rich ground conditions. LS-DYNA finite element models were calibrated against the laboratory and field results to interpret the governing load-transfer mechanism and to assess the influence of representative stratum resistance. The laboratory tests showed that the steel–grout bond response depended on both interfacial degradation and mortar splitting, indicating that peak bond strength should be interpreted together with failure mode and slip development. In the field tests, all anchors failed by pull-out, and the steel bar and grout body were pulled out together, showing that the full-scale response was governed mainly by the grout–ground interface rather than by steel–grout debonding. The calibrated numerical models reproduced the main load–displacement trends and supported a scale-dependent transition from steel–grout bond control at material scale to grout–ground interface control at field scale. The results provide a basis for evaluating rapid-setting grouts for high-strength anchors in water-rich sandy-pebble ground.

  • Open Access

    Investigation of Mechanical Degradation and Microstructural Evolution of Red-Bed Soft Rocks Under Wetting–Drying Cycles

    by Tao Peng, Fanmin He, Dongxing Ren, Yan Li, Longfei Chen, Huaping Wu

    To clarify the water-sensitive deterioration mechanisms of red-bed soft rocks under repeated wetting–drying cycles, mudstone samples from two representative sites in the Sichuan Basin were investigated through multiscale experiments combining mechanical testing, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results showed that samples from Sampling Site ① exhibited higher compressive strength, elastic modulus, cohesion, and friction angle due to stronger cementation and greater structural integrity, whereas samples from Sampling Site ② showed weaker bonding and more initial structural defects. During wetting–drying cycling, both rock types experienced progressive mechanical degradation, with elastic modulus exhibiting the most pronounced deterioration after eight cycles. XRD analysis indicated that the main mineral assemblages remained stable without obvious phase transformation, while the reduction in calcite and clay minerals was associated with the weakening of cementing materials. SEM observations revealed distinct deterioration pathways: Site ① mainly underwent gradual damage characterized by particle-contact weakening, pore development, and shrinkage cracking, whereas Site ② experienced rapid structural degradation involving cement dissolution, particle debonding, and pore–fracture connectivity. These results indicate that wetting–drying deterioration is governed not only by mineral composition but also by bonding conditions and initial pore–fracture structures. The findings provide insights into the differentiated stability assessment and prevention of red-bed soft rock slopes and subgrades under water-sensitive environments.

  • Open Access

    A Data-Driven Two-Layer Case-Based Reasoning Framework for Intelligent Deep Excavation Retaining Structure Selection Under Incomplete Information

    by Tao Peng, Dongxing Ren, Jialong Li, Zhixiang Yu, Jiufan Zhu

    In early-stage projects, incomplete geological data can affect the selection of retaining structures for deep excavations. This paper proposes an adaptive two-layer Case-Based Reasoning (CBR) framework to address this issue. First, a case database was constructed; feature interaction terms were incorporated into the similarity measure to capture the nonlinear coupling among geological parameters, and a Gradient Boosted Decision Tree (GBDT) was employed to achieve an objective, data-driven allocation of feature weights. The first layer implements a gating mechanism based on logical conjunction and adaptive tolerance thresholds, which automatically switches between the two inference paths when information is missing, preventing invalid hard matches; the second layer applies K-means++ clustering and local inductive reasoning to mitigate the biases caused by data sparsity. Experiments demonstrate that, under conditions of parameter incompleteness and noise interference, the method’s Top-3 recommendation accuracy significantly outperforms traditional models and machine learning baseline models and exhibits strong resistance to interference, providing a solid methodological foundation for retaining structure selection in complex data scenarios.

  • Open Access

    Failure Mode- and Time-Dependent Reliability Model of Tunnel Lining Structure Under Extremely High Ground Stress

    by Tao Peng, Dongxing Ren, Fanmin He, Binjia Li, Fei Wu, Shijie Xu

    Damage to tunnel lining significantly influences the stability of tunnels during operation, particularly under conditions of extra-high ground stress. This article investigates the stability of tunnel linings subjected to extra-high ground stress, providing an in-depth analysis of crack damage modes. A time-varying reliability model based on the structural performance function is proposed, which incorporates the effects of the plastic zone and the identified crack damage modes. The plastic zone and the distribution of the surrounding rock stress field throughout the excavation process were simulated, elucidating the relationship between vault displacement and stress release rate. The time-varying reliability model is employed to assess lining behavior under extremely high ground stress and to establish the patterns governing its service life. The findings of this study offer a crucial reference for further investigations into the time-varying reliability of tunnel linings in the context of extreme ground stress.