Tao Peng
Tao Peng has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Binjia Li
China MCC5 Group Corp. Ltd., Chengdu 610023, China
3 shared publications - Dongxing Ren
Chengdu Surveying Geotechnical Research Institute Co., Ltd. of MCC, Chengdu 610023, China
3 shared publications - Peng Xue
Chengdu Surveying Geotechnical Research Institute Co., Ltd. of MCC, Chengdu 610023, China
2 shared publications - Yang Li
School of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, China
2 shared publications - Fanmin He
Chengdu Surveying Geotechnical Research Institute Co., Ltd. of MCC, Chengdu 610023, China
1 shared publication - Fei Wu
State Key Laboratory for the Coal Mine Disaster Dynamics and Controls, Chongqing University, Chongqing, China
1 shared publication
Latest Publications
- Open Access
- 19 September 2026
- Published by MDPI AG in Construction Materials
- Vol. 6 (5) , 71
Fresh-State Properties and Machine-Learning Prediction of Sulfoaluminate Cement Grout for Water-Rich Tunnels
This study investigated sulfoaluminate cement grout intended for water-rich tunnel applications and developed machine-learning models for predicting its fresh-state properties. The experimental programme included a 31-mixture base series varying the water-to-binder ratio, Class F fly ash, steel slag, and polycarboxylate ether (PCE) superplasticizer dosage; a hydroxyethyl cellulose (HEC)-modified series with a fixed binder composition; and a static-water turbidity series used to evaluate particle dispersion resistance. Flowability, setting time, compressive strength, and turbidity were measured. The results showed that the water-to-binder ratio, fly ash, steel slag, PCE, and HEC affected the balance between workability, setting behaviour, strength development, and static-water dispersion resistance. Increasing the HEC dosage from 0.004 to 0.006 reduced turbidity by 84.1–94.7% under static-water conditions, whereas an HEC dosage of 0.007 reduced the 7 and 28 d compressive strengths by 51.5% and 40.7%, respectively. Machine-learning models trained on the 31-mixture HEC-free dataset provided exploratory predictions of flowability and initial and final setting times. Extra Trees, support vector regression, and Extra Trees gave the lowest nested leave-one-out cross-validation (LOOCV) errors for flowability, initial setting time, and final setting time, with R2 values of 0.819, 0.743, and 0.767, respectively. Shapley Additive Explanations (SHAP) analysis indicated that the water-to-binder ratio dominated flowability prediction, whereas fly ash contributed strongly to setting-time prediction. The results provide complementary experimental and data-driven evidence for comparing sulfoaluminate cement grout formulations within the investigated composition domain.
- 19 September 2026
- Published by MDPI AG in Construction Materials
- Vol. 6 (5) , 71
Open AccessFresh-State Properties and Machine-Learning Prediction of Sulfoaluminate Cement Grout for Water-Rich Tunnels
This study investigated sulfoaluminate cement grout intended for water-rich tunnel applications and developed machine-learning models for predicting its fresh-state properties. The experimental programme included a 31-mixture base series varying the water-to-binder ratio, Class F fly ash, steel slag, and polycarboxylate ether (PCE) superplasticizer dosage; a hydroxyethyl cellulose (HEC)-modified series with a fixed binder composition; and a static-water turbidity series used to evaluate particle dispersion resistance. Flowability, setting time, compressive strength, and turbidity were measured. The results showed that the water-to-binder ratio, fly ash, steel slag, PCE, and HEC affected the balance between workability, setting behaviour, strength development, and static-water dispersion resistance. Increasing the HEC dosage from 0.004 to 0.006 reduced turbidity by 84.1–94.7% under static-water conditions, whereas an HEC dosage of 0.007 reduced the 7 and 28 d compressive strengths by 51.5% and 40.7%, respectively. Machine-learning models trained on the 31-mixture HEC-free dataset provided exploratory predictions of flowability and initial and final setting times. Extra Trees, support vector regression, and Extra Trees gave the lowest nested leave-one-out cross-validation (LOOCV) errors for flowability, initial setting time, and final setting time, with R2 values of 0.819, 0.743, and 0.767, respectively. Shapley Additive Explanations (SHAP) analysis indicated that the water-to-binder ratio dominated flowability prediction, whereas fly ash contributed strongly to setting-time prediction. The results provide complementary experimental and data-driven evidence for comparing sulfoaluminate cement grout formulations within the investigated composition domain.
- Open Access
- 18 September 2026
- Published by MDPI AG in Construction Materials
- Vol. 6 (5) , 69
Pull-Out Performance of Rapid-Setting Sulphoaluminate Cement Grout for High-Strength Threaded Anchors in Water-Rich Sandy-Pebble Strata
Anchors constructed in water-rich sandy-pebble strata require grout systems that can maintain material continuity and transfer tensile force effectively before groundwater-related disturbance weakens the borehole interface. This study investigated a sulphoaluminate cement-based rapid-setting grout (SAC) for PSB high-strength threaded anchors, using an ordinary Portland cement-based grout (OPC) as a reference material. Laboratory central pull-out tests were first conducted on grout cube specimens with different steel-bar diameters and bonded lengths to evaluate the steel–grout bond response. Full-scale field pull-out tests were then performed to examine the anchor–grout–ground response under water-rich ground conditions. LS-DYNA finite element models were calibrated against the laboratory and field results to interpret the governing load-transfer mechanism and to assess the influence of representative stratum resistance. The laboratory tests showed that the steel–grout bond response depended on both interfacial degradation and mortar splitting, indicating that peak bond strength should be interpreted together with failure mode and slip development. In the field tests, all anchors failed by pull-out, and the steel bar and grout body were pulled out together, showing that the full-scale response was governed mainly by the grout–ground interface rather than by steel–grout debonding. The calibrated numerical models reproduced the main load–displacement trends and supported a scale-dependent transition from steel–grout bond control at material scale to grout–ground interface control at field scale. The results provide a basis for evaluating rapid-setting grouts for high-strength anchors in water-rich sandy-pebble ground.
- 18 September 2026
- Published by MDPI AG in Construction Materials
- Vol. 6 (5) , 69
Open AccessPull-Out Performance of Rapid-Setting Sulphoaluminate Cement Grout for High-Strength Threaded Anchors in Water-Rich Sandy-Pebble Strata
Anchors constructed in water-rich sandy-pebble strata require grout systems that can maintain material continuity and transfer tensile force effectively before groundwater-related disturbance weakens the borehole interface. This study investigated a sulphoaluminate cement-based rapid-setting grout (SAC) for PSB high-strength threaded anchors, using an ordinary Portland cement-based grout (OPC) as a reference material. Laboratory central pull-out tests were first conducted on grout cube specimens with different steel-bar diameters and bonded lengths to evaluate the steel–grout bond response. Full-scale field pull-out tests were then performed to examine the anchor–grout–ground response under water-rich ground conditions. LS-DYNA finite element models were calibrated against the laboratory and field results to interpret the governing load-transfer mechanism and to assess the influence of representative stratum resistance. The laboratory tests showed that the steel–grout bond response depended on both interfacial degradation and mortar splitting, indicating that peak bond strength should be interpreted together with failure mode and slip development. In the field tests, all anchors failed by pull-out, and the steel bar and grout body were pulled out together, showing that the full-scale response was governed mainly by the grout–ground interface rather than by steel–grout debonding. The calibrated numerical models reproduced the main load–displacement trends and supported a scale-dependent transition from steel–grout bond control at material scale to grout–ground interface control at field scale. The results provide a basis for evaluating rapid-setting grouts for high-strength anchors in water-rich sandy-pebble ground.
- Open Access
- 20 March 2025
- Published by MDPI AG in Infrastructures
- Vol. 10 (3) , 68
Failure Mode- and Time-Dependent Reliability Model of Tunnel Lining Structure Under Extremely High Ground Stress
Damage to tunnel lining significantly influences the stability of tunnels during operation, particularly under conditions of extra-high ground stress. This article investigates the stability of tunnel linings subjected to extra-high ground stress, providing an in-depth analysis of crack damage modes. A time-varying reliability model based on the structural performance function is proposed, which incorporates the effects of the plastic zone and the identified crack damage modes. The plastic zone and the distribution of the surrounding rock stress field throughout the excavation process were simulated, elucidating the relationship between vault displacement and stress release rate. The time-varying reliability model is employed to assess lining behavior under extremely high ground stress and to establish the patterns governing its service life. The findings of this study offer a crucial reference for further investigations into the time-varying reliability of tunnel linings in the context of extreme ground stress.
- 20 March 2025
- Published by MDPI AG in Infrastructures
- Vol. 10 (3) , 68
Open AccessFailure Mode- and Time-Dependent Reliability Model of Tunnel Lining Structure Under Extremely High Ground Stress
Damage to tunnel lining significantly influences the stability of tunnels during operation, particularly under conditions of extra-high ground stress. This article investigates the stability of tunnel linings subjected to extra-high ground stress, providing an in-depth analysis of crack damage modes. A time-varying reliability model based on the structural performance function is proposed, which incorporates the effects of the plastic zone and the identified crack damage modes. The plastic zone and the distribution of the surrounding rock stress field throughout the excavation process were simulated, elucidating the relationship between vault displacement and stress release rate. The time-varying reliability model is employed to assess lining behavior under extremely high ground stress and to establish the patterns governing its service life. The findings of this study offer a crucial reference for further investigations into the time-varying reliability of tunnel linings in the context of extreme ground stress.