Content optimization of polyphenylene sulfide composites filled with carbon fibers of different size
Open Access
- 19 November 2019
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2167 (1) , 020121
Abstract
The chemical content of polyphenylene sulfide (PPS) based composite with specified physical–mechanical properties is determined in the study with the use of experimental data on the dependence of effective properties (volumetric wear, elastic modulus, elongation at break, etc.) versus the values of control parameters. The latter are degree of filling with (i) Short Carbon Fibers (SCF) of ∼70 µm long and (ii) Chopped Carbon Fibers (CCF) ∼2 mm long. After the required number of experimental reference points has been determined the technique for data supplementation up to a regular numerical array with the use of linear interpolation is employed. The obtained dependences of the effective properties versus the control parameter values are constructed in the form of surfaces and corresponding isolines. At the contour plots, a region with the required effective properties is then highlighted. Since the regions overlap each other, their intersection determines the allowable control parameters range that impart the required values to the effective properties. The possibility to design filled polymer materials with a complex of predefined strain-strength and tribological properties is demonstrated. The experimental results are used to gain the reference points in contrast to the previously used approach when a set of computational experiment data were employed. On the one hand, the combination of a full-scale laboratory and computational experiments makes the process of modeling and design materials more evident, clear and reasonable from a physical point of view. On the other hand, it allows to interpret the results as more reliable, as well as less time and material consuming.Keywords
This publication has 7 references indexed in Scilit:
- Receiving the Recipe of the Compositions Based on UHMWPE with the Assigned PropertiesInorganic Materials: Applied Research, 2019
- Obtaining of specified effective mechanical, thermal, and electrical characteristics of composite filled with dispersive materialsInorganic Materials: Applied Research, 2017
- Friction and wear of PPS/CNT nanocomposites with formation of electrically isolating transfer filmsTribology International, 2013
- Polyphenylene sulfide (PPS) composites reinforced with recycled carbon fiberComposites Science and Technology, 2013
- Study on mechanical properties of powder impregnated glass fiber reinforced poly(phenylene sulphide) by injection molding at various temperaturesJournal of Applied Polymer Science, 2009
- Study on friction and wear behavior of polyphenylene sulfide composites reinforced by short carbon fibers and sub-micro TiO2 particlesComposites Science and Technology, 2008
- Study of the tribological synergistic effects in nano CuO-filled and fiber-reinforced polyphenylene sulfide compositesWear, 2005