Comparative Study of Different Measurement Methods for Characterizing Rheological Properties of Lubrication Layer
Open Access
Abstract
The lubrication layer plays a governing role in predicting the pumpability of fresh concrete. To determine the effect of measurement methods on the characterization of the rheological properties of the lubrication layer, different measurement systems, including Sliper, tribometer, and the utilization of a mortar rheometer, were employed. The rheological properties and workability of bulk concrete were measured in parallel to investigate the correlation between them and the rheological properties of the lubrication layer. The results show that the measured values of the rheological parameters of the lubrication layer differ due to the systematic deviation between different measurement methods. The results obtained by both tribometer and mortar rheometer were well-correlated, having a linear relationship with the rheological parameters of bulk concrete. The correlation coefficient between results gained with Sliper and rheological parameters of concrete or lubrication layer determined with other methods was not high enough. Addition friction led to the large accidental error and overestimated yield stress obtained with Sliper. The workability of concrete is only suitable for characterizing the rheological properties of bulk concrete.Keywords
Funding Information
- National Key R&D Program of China (2017YFB0310101)
- National Natural Science Foundation of China (No. 51878381)
This publication has 40 references indexed in Scilit:
- Prediction on pipe flow of pumped concrete based on shear-induced particle migrationCement and Concrete Research, 2013
- Workability and proportion design of pumping concrete based on rheological parametersConstruction and Building Materials, 2013
- Lubrication layer properties during concrete pumpingCement and Concrete Research, 2013
- Parameters influencing pressure during pumping of self-compacting concreteMaterials and Structures, 2012
- Flow induced particle migration in fresh concrete: Theoretical frame, numerical simulations and experimental results on model fluidsCement and Concrete Research, 2012
- Use of tribometer to estimate interface friction and concrete boundary layer composition during the fluid concrete pumpingConstruction and Building Materials, 2010
- Flow conditions of fresh mortar and concrete in different pipesCement and Concrete Research, 2009
- From ordinary rhelogy concrete to self compacting concrete: A transition between frictional and hydrodynamic interactionsCement and Concrete Research, 2008
- A generalized approach for the determination of yield stress by slump and slump flowCement and Concrete Research, 2004
- Measurement of shear-induced self-diffusion in concentrated suspensions of spheresJournal of Fluid Mechanics, 1987