Rui Jing
Research Subjects
Rui Jing has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Peiyu Yan
Department of Civil Engineering, Tsinghua University, Beijing 100084, China
2 shared publications - Yu Liu
China Construction First Group Construction and Development Co., Ltd., Beijing 100102, China
2 shared publications Dazhi Wang
School of Civil Engineering, Tianjin University, No. 92, Weijin Road, Nankai District, Tianjin, China, 300072
1 shared publication- Jingfu Kang
Tianjin University
1 shared publication - Zhaowei Shen
1 Shandong Electric Power Engineering Consulting Institute Co. Ltd, Jinan, Shandong, China
1 shared publication - Zhen Wang
Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST)
1 shared publication
Latest Publications
- Open Access
Effects of Mineral Admixtures on the Evolution of Static Yield Stress of Different Composite Pastes
The effects of different mineral admixtures on the evolution of static yield stress of common composite cementitious material paste and ultra-high-performance concrete (UHPC)-based paste were investigated. The results show that there are obvious differences in the role of mineral admixtures in the common paste and the UHPC-based paste. Adding mineral admixtures can change the initial static yield stress of the paste by affecting the particle size, particle shape and the charged particles. The addition of mineral admixtures with small particle size such as silica fume and ultrafine slag can increase the initial static yield stress of common paste but reduce that of UHPC-based paste. Adding mineral admixtures changes the evolution of static yield stress of the paste by affecting the particle spacing and the formation and growth rate of hydration products. In turn, the addition of ultrafine slag or silica fume increases the growth of the static yield stress of common paste. Adding slag, fly ash or fly ash microbeads successively reduces the static yield stress of common paste at the later stage. Affected by the content of PCE, the static yield stress of UHPC-based paste containing fly ash microbeads, slag, ultrafine slag and fly ash increases sequentially compared with the blank group at the later stage. The effect of silica fume with different dosages on the evolution of static yield stress of UHPC-based paste is significantly different.
Open AccessEffects of Mineral Admixtures on the Evolution of Static Yield Stress of Different Composite Pastes
The effects of different mineral admixtures on the evolution of static yield stress of common composite cementitious material paste and ultra-high-performance concrete (UHPC)-based paste were investigated. The results show that there are obvious differences in the role of mineral admixtures in the common paste and the UHPC-based paste. Adding mineral admixtures can change the initial static yield stress of the paste by affecting the particle size, particle shape and the charged particles. The addition of mineral admixtures with small particle size such as silica fume and ultrafine slag can increase the initial static yield stress of common paste but reduce that of UHPC-based paste. Adding mineral admixtures changes the evolution of static yield stress of the paste by affecting the particle spacing and the formation and growth rate of hydration products. In turn, the addition of ultrafine slag or silica fume increases the growth of the static yield stress of common paste. Adding slag, fly ash or fly ash microbeads successively reduces the static yield stress of common paste at the later stage. Affected by the content of PCE, the static yield stress of UHPC-based paste containing fly ash microbeads, slag, ultrafine slag and fly ash increases sequentially compared with the blank group at the later stage. The effect of silica fume with different dosages on the evolution of static yield stress of UHPC-based paste is significantly different.
- Open Access
Comparative Study of Different Measurement Methods for Characterizing Rheological Properties of Lubrication Layer
The lubrication layer plays a governing role in predicting the pumpability of fresh concrete. To determine the effect of measurement methods on the characterization of the rheological properties of the lubrication layer, different measurement systems, including Sliper, tribometer, and the utilization of a mortar rheometer, were employed. The rheological properties and workability of bulk concrete were measured in parallel to investigate the correlation between them and the rheological properties of the lubrication layer. The results show that the measured values of the rheological parameters of the lubrication layer differ due to the systematic deviation between different measurement methods. The results obtained by both tribometer and mortar rheometer were well-correlated, having a linear relationship with the rheological parameters of bulk concrete. The correlation coefficient between results gained with Sliper and rheological parameters of concrete or lubrication layer determined with other methods was not high enough. Addition friction led to the large accidental error and overestimated yield stress obtained with Sliper. The workability of concrete is only suitable for characterizing the rheological properties of bulk concrete.
Open AccessComparative Study of Different Measurement Methods for Characterizing Rheological Properties of Lubrication Layer
The lubrication layer plays a governing role in predicting the pumpability of fresh concrete. To determine the effect of measurement methods on the characterization of the rheological properties of the lubrication layer, different measurement systems, including Sliper, tribometer, and the utilization of a mortar rheometer, were employed. The rheological properties and workability of bulk concrete were measured in parallel to investigate the correlation between them and the rheological properties of the lubrication layer. The results show that the measured values of the rheological parameters of the lubrication layer differ due to the systematic deviation between different measurement methods. The results obtained by both tribometer and mortar rheometer were well-correlated, having a linear relationship with the rheological parameters of bulk concrete. The correlation coefficient between results gained with Sliper and rheological parameters of concrete or lubrication layer determined with other methods was not high enough. Addition friction led to the large accidental error and overestimated yield stress obtained with Sliper. The workability of concrete is only suitable for characterizing the rheological properties of bulk concrete.
- Open Access
- 1 February 2018
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 25 (1) , 47-51
Analysis on the Tendon Spacing of Prestressed Tunnel Liner
In this paper, based on cylindrical shell theory of elastic mechanics, the mechanical property of prestressed concrete lining structure was studied; models of calculating infinitely-long structure and semi-infinitely-long structure were...
- 1 February 2018
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 25 (1) , 47-51
Open AccessAnalysis on the Tendon Spacing of Prestressed Tunnel Liner
In this paper, based on cylindrical shell theory of elastic mechanics, the mechanical property of prestressed concrete lining structure was studied; models of calculating infinitely-long structure and semi-infinitely-long structure were...