Research on Mechanical Performance of Improved Low Vibration Track and Its Feasibility Analysis for Heavy-Haul Railway Applications
Open Access
- 1 November 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (21) , 10232
Abstract
With the gradual increase of the cargo weight of heavy-haul trains, the traditional ballasted track with the accumulation of stone and ballast has been unable to meet its structural safety requirements. From the comparison of the three common ballastless tracks in China, it can be seen that the low-vibration track (LVT) has the advantages of reasonable structure, low cost, and easy maintenance. Therefore, the design and research of heavy-haul railways are focused on, and it is urgent to study the applicability of LVT in heavy-haul railways. Method: By improving the slope of the short side of the LVT support block, the support block has a better load bearing capacity, so as to achieve the purpose of bearing a larger axle load. Through 1:1 full-scale model test and finite element simulation, the static mechanical properties of Improved LVT (ILVT) and Traditional LVT (TLVT) are compared and analyzed. Result: Compared with TLVT, ILVT has smaller vertical displacement and track gauge changes when subjected to the same load. The proven and reliable finite element model also shows that ILVT’s load sharing is less affected. In the case of achieving the same deformation, ILVT can withstand greater vertical and lateral loads. Conclusions: Compared with the TLVT, the ILVT design can reduce the vertical displacement of the rail and the supporting block, better control the track subsidence, and improve the driving safety of the LVT. At the same time, ILVT improves the anti-overturning ability of the rail and support block under lateral load, reduces the expansion of the gauge and the lateral spacing of the support block, and improves the stability of the track structure. ILVT can also be considered for the weight of 40t and other large axle load, and has broad application prospects.Keywords
This publication has 26 references indexed in Scilit:
- Interface damage and its effect on vibrations of slab track under temperature and vehicle dynamic loadsInternational Journal of Non-Linear Mechanics, 2014
- Investigation on the damage mechanism and prevention of heavy-haul railway railEngineering Failure Analysis, 2013
- Heavy-haul Train’s Operating Ratio, Speed and Intensity Relationship for Daqin Railway Based on Cellular Automata ModelInformation Technology Journal, 2011
- Experimental investigation between rolling contact fatigue and wear of high-speed and heavy-haul railway and selection of rail materialWear, 2011
- Determining the deterioration cost for railway tracksProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2009
- Failure analysis of concrete sleepers in heavy haul railway tracksEngineering Failure Analysis, 2008
- Full-scale Experiment on the Dynamic Behavior of Railway Vehicles against Heavy Track VibrationJournal of Environment and Engineering, 2007
- Vibration in operating heavy haul trucks in overburden miningApplied Ergonomics, 2004
- The application of contact mechanics to rail profile design and rail grindingWear, 2002
- Analysis of railway track vibrationJournal of Sound and Vibration, 1989