Instrumented Becker Penetration Test. II: iBPT-SPT Correlation for Characterization and Liquefaction Assessment of Gravelly Soils
- 1 September 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 143 (9)
Abstract
The Becker penetration test (BPT) is a widely used tool for the characterization of gravelly soils, especially for liquefaction assessment. An instrumented Becker penetration test (iBPT) was developed and integrated into the standard, closed-ended Becker drill string. The iBPT produces a continuous profile of energy-normalized blow count values , which are computed using the acceleration and force measurements recorded directly behind the driving shoe. The profile is repeatable and unaffected by hammer driving energy or accumulated shaft resistance. This paper presents the correlation between iBPT and standard penetration test (SPT) values, which is necessary for performing liquefaction assessment in gravelly soils. In developing this correlation, field variability was addressed by comparing median iBPT and SPT values from adjacent soundings over geologically consistent depth intervals. A framework was also developed to assess and, when appropriate, correct for gravel influence on measured SPT blow count values. This framework uses SPT blows per inch as well as physical evidence from SPT and adjacent Sonic samples. The correlation factor between iBPT and SPT is shown to be a constant value of 1.8 and independent of soil type or penetration resistance magnitude.
Keywords
This publication has 6 references indexed in Scilit:
- Instrumented Becker Penetration Test. I: Equipment, Operation, and PerformanceJournal of Geotechnical and Geoenvironmental Engineering, 2017
- Evaluation of Becker penetration test interpretation methods for liquefaction assessment in gravelly soilsCanadian Geotechnical Journal, 2017
- Chinese Dynamic Penetration Test for Liquefaction Evaluation in Gravelly SoilsJournal of Geotechnical and Geoenvironmental Engineering, 2013
- Subsurface Exploration Using the Standard Penetration Test and the Cone Penetrometer TestEnvironmental & Engineering Geoscience, 2006
- Correlations of mud-injection Becker and standard penetration testsCanadian Geotechnical Journal, 1997
- Becker and standard penetration tests (BPT–SPT) correlations with consideration of casing frictionCanadian Geotechnical Journal, 1994