Instrumented Becker Penetration Test. I: Equipment, Operation, and Performance
- 1 September 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 143 (9)
Abstract
The Becker penetration test (BPT) is a widely used tool for characterizing gravelly soils, especially for liquefaction assessment. Interpretation of BPT data is complicated by the variable energy transferred from the hammer to the drill and by the shaft resistance that develops along the drill string which generally increases with penetration depth. Existing BPT interpretation methods that use above-ground measurements have had limited success in accurately separating the shaft and tip resistance. Therefore, penetration resistance with depth cannot be reliably predicted. An instrumented Becker penetration test (iBPT) that measures acceleration and force directly behind the driving shoe in order to compute the energy delivered to the driving tip was developed and integrated into the standard closed-ended Becker drill system. The equipment and data acquisition system are described in this paper. The analysis procedure used to compute energy-normalized blow count values and produce continuous penetration resistance profiles is outlined. The energy-normalized blow count profiles generated are shown to be independent of penetration depth, predrilling depth, shaft resistance magnitude, and hammer operating conditions. In particular, the efficacy of a residual energy-based normalization scheme is demonstrated. Finally, a discussion regarding energy measurements, locked-in stress at the drill string tip, and the use of the pull-back and redrive procedure is presented.Keywords
This publication has 9 references indexed in Scilit:
- Instrumented Becker Penetration Test. II: iBPT-SPT Correlation for Characterization and Liquefaction Assessment of Gravelly SoilsJournal of Geotechnical and Geoenvironmental Engineering, 2017
- Energy Efficiency for Standard Penetration TestsJournal of Geotechnical and Geoenvironmental Engineering, 2005
- Review of Standard Penetration Test Short Rod CorrectionsJournal of Geotechnical and Geoenvironmental Engineering, 2005
- Correlations of mud-injection Becker and standard penetration testsCanadian Geotechnical Journal, 1997
- Becker and standard penetration tests (BPT–SPT) correlations with consideration of casing frictionCanadian Geotechnical Journal, 1994
- Energy Dynamics of SPTJournal of the Geotechnical Engineering Division, 1979
- Velocity Measurement of Free-Fall SPT HammerJournal of the Geotechnical Engineering Division, 1979
- Soil Resistance Predictions from Pile DynamicsJournal of the Soil Mechanics and Foundations Division, 1972
- Michigan Study of Pile Driving HammersJournal of the Soil Mechanics and Foundations Division, 1965