Aging of anhydride‐hardened epoxies in lubricants at elevated temperatures
- 23 March 2017
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (27)
Abstract
In automotive under‐the‐hood applications, electronics respectively their packaging materials come in contact with automotive fluids. The effect of automatic transmission fluid (ATF) on an anhydride‐cured epoxy was investigated at temperatures up to 180 °C for up to 1000 h. This study has shown that ATF retards the oxidative aging of the epoxy, presumably due to oxygen consumption. Whereas in air the material underwent a thermo‐oxidative aging with a mass loss of up to 4% and a strong broadening of Tg to higher temperatures, in ATF a temperature dependent distinctive drop of Tg from 142 to 126 °C after 1000 h aging at 180 °C, and a mass loss of maximum 1% was observed which might be a thermal decomposition of the epoxy material. A slight broadening of the damping factors might indicate an intrusion of ATF components. A color change of the samples could be observed after aging in air and ATF, with the discoloration in air being more intense. An explanation for the color change might be either a minor amount of oxygen causing an oxidative discoloration reaction or the intrusion of colored ATF degradation products. While the oxidation‐kinetics in air exhibited Arrhenius temperature‐dependence the mechanism in ATF changed above 165 °C. An acceleration of aging tests at temperatures beyond 150 °C is, therefore, not possible. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 44877.Keywords
This publication has 21 references indexed in Scilit:
- Effect of filler on thermal aging of composites for next-generation power linesComposites Part A: Applied Science and Manufacturing, 2011
- Curing behavior and thermal properties of multifunctional epoxy resin with methylhexahydrophthalic anhydrideJournal of Applied Polymer Science, 2006
- Thermal and photochemical ageing of epoxy resin – Influence of curing agentsPolymer Degradation and Stability, 2006
- The Changing Automotive Environment: High-Temperature ElectronicsIEEE Transactions on Electronics Packaging Manufacturing, 2004
- Chemiluminescence of anhydride‐cured epoxy networks: Influence of the anhydride structureJournal of Polymer Science Part A: Polymer Chemistry, 1993
- Thermal oxidation of anhydride cured epoxies—III. Effect on mechanical propertiesPolymer Degradation and Stability, 1993
- Thermal oxidation of anhydride cured epoxies. I—mechanistic aspectsPolymer Degradation and Stability, 1992
- Thermal oxidation of anhydride cured epoxies II—Depth distribution of oxidation productsPolymer Degradation and Stability, 1992
- Crosslinking mechanism of an anhydride‐cured epoxy resin as studied by fourier transform infrared spectroscopyJournal of Polymer Science: Polymer Chemistry Edition, 1981
- The curing mechanism of epoxy resinsJournal of Chemical Technology & Biotechnology, 1956