Optimized chemical mechanical polishing of Parylene C for high-density wiring in flexible electronics
- 2 August 2022
- journal article
- research article
- Published by IOP Publishing in Flexible and Printed Electronics
- Vol. 7 (3) , 035007
Abstract
With the rapid development of flexible electronics, an increasing number of microfabrication strategies originating from the Si-based integrated circuits field have been explored on organic materials. Parylene C, a polymer, has been widely used in the microelectromechanical systems field because of its outstanding fabrication merits, such as room-temperature processability, conformal coating, and precise thin film deposition capability with the thickness tunable from 1 nm to 100 μ m. As a good dielectric material, the Parylene C is also suitable for interlayer dielectrics in flexible electronics. This study develops an optimized chemical mechanical polishing (CMP) technique of Parylene C for high-density redistribution wiring in high-performance flexible electronics. The roughness of the Parylene C surface after CMP was as low as 14.3 ± 1.5 Å. The problems of slurry pollution and mechanical failure of the Parylene film that degrade the dielectric performance of the Parylene C could be avoided by taking the optimized CMP method. The multi-material structure constructed by Parylene C, Silicon and electroplated Copper was prepared and polished using the optimized CMP process. Additionally, a flexible wiring sample has been successfully patterned by the Damascene process through the optimized CMP process. In this sample, both the distance between each wire and the wire width were as small as 5 μ m. The optimized Parylene C CMP process is easy-to-realize, highly efficient, low cost, and with minor defects; it provides a promising way to achieve high-density interconnection in high-performance flexible electronic devices.Keywords
Funding Information
- An all-in-one equipment for capturing, labelling and retransfusing autologous circulating tumor cells to enable in vivo visualization study of tumor metastasis (82027805)
- "Flexible trenches" based silicon-based IC / MEMS hybrid integrated microsystem (62074003)
This publication has 25 references indexed in Scilit:
- Micromachining of Parylene C for bioMEMSPolymers for Advanced Technologies, 2015
- Conductive polymer/metal composites for interconnect of flexible devicesJapanese Journal of Applied Physics, 2015
- Parylene conformal coating encapsulation as a method for advanced tuning of mechanical properties of an artificial hair cellSoft Matter, 2013
- Surface-complex films of guanidine on tantalum nitride electrochemically characterized for applications in chemical mechanical planarizationThin Solid Films, 2012
- Long-term in-vivo Investigation of Parylene-C as Encapsulation Material for Neural InterfacesProcedia Engineering, 2011
- Characterization of parylene C as an encapsulation material for implanted neural prosthesesJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2010
- Encapsulation of an Integrated Neural Interface Device With Parylene CIEEE Transactions on Biomedical Engineering, 2008
- Embedded benzocyclobutene in silicon: An integrated fabrication process for electrical and thermal isolation in MEMSMicroelectronic Engineering, 2005
- Damascene copper interconnects with polymer ILDsThin Solid Films, 1997
- Chemical-Mechanical polishing of parylene- n films: evaluation by X-Ray photoelectron spectroscopy and atomic force microscopyJournal of Electronic Materials, 1997