Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Han Xu has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Silicon‐Embedded Multifunctional Heterogeneous Integration for Miniaturized Photoplethysmography Detection Devices

    by Lang Chen, Shizun Hu, Zhou Yang, Shitao Shen, Pan Zhang, Han Xu, Chi Zhang, Wei Wang

    The multifunctional integration of chips with high flexibility and scalable manufacturing is crucial for enhancing chip performance, reducing chip size, and simplifying chip design. However, balancing volume, cost, flexibility, and functionality using traditional heterogeneous integration methods is challenging. To overcome this, a silicon‐embedded multifunctional heterogeneous integration method based on top‐down engineering was proposed. As a representative application, a wearable photoplethysmography detection system was demonstrated. The functional modules of this system required for sensing, acquisition, and processing were embedded and reconnected on the same silicon interposer to form a new integrated chip. A thermal‐aware floorplan optimization algorithm was employed to improve the thermal performance of the integrated chip, achieving a 6.5°C reduction in the peak temperature. The chip accurately detected physiological changes across different frequency ranges following physical activity performed at varying intensities by test participants. Compared to traditional integration methods, the proposed method achieved a 46% and 94.7% reduction in power consumption and volume, respectively, and a remarkable 90% increase in functional unit density. This technology promotes rapid, flexible, and low‐cost manufacturing of multifunctional chips toward the development of next‐generation multifunctional, low‐power, miniaturized electronic devices.


  • Open Access

    Machine learning based real-time assessment of fabrication deviation induced mechanical performance variations in stretchable silicon arrays

    by Bo Wen, Han Xu, Yikang Ding, Qi Wang, Pan Zhang, Chi Zhang, Wei Wang

    Microelectromechanical system fabrication represents a promising approach for silicon-based flexible electronics, leveraging its scalability and miniaturization merits. However, fabrication-induced geometric deviations stretchable microstructures can result in significant variations in mechanical performances. Current assessment methods lack sufficient accuracy for these precision-sensitive manufacturing processes. This work proposes a machine-learning (ML)-based assessment methodology for accurately and rapidly predicting the mechanical performances, including equivalent Young's modulus and the maximum elastic stretchability, of Parylene three-dimensional micro-Kirigami stretchable structures in a stretchable silicon array affected by the fabrication-induced geometric deviations. By applying the dimensionality reduction technique specifically designed for few-shot ML modeling, the framework achieves prediction accuracies exceeding 95% on the test set. SHapley Additive exPlanations (SHAP) analysis is further utilized to quantify the impact of various geometric features on mechanical performances. This ML-based assessment methodology successfully facilitates real-time feedback from process-induced geometric deviations to the qualification probability of mechanical performances. This proposed approach supports design-for-manufacturability (DFM) of silicon-based stretchable arrayed devices manufacturing and lays the foundation for high-consistency wafer-scale manufacturing of high-performance stretchable silicon electronics.

  • Reducing warpage for polymer-based embedded silicon fan-out (P-eSiFO) packaging during thermal process loadings

    by Jianyu Du, Lang Chen, Han Xu, Jinwen Zhang, Huaiqiang Yu, Chi Zhang, Wei Wang

    Polymer-based embedded silicon-based fan-out (P-eSiFO) is a new packaging technique which provides a way to high-density integration of high-performance chiplets. However, integrating multiple materials with diverse physical properties in the P-eSiFO leads to substantial warpage during downstream high-temperature manufacturing processes. In this study, a thermo-mechanical model of a P-eSiFO was developed to examine the thermomechanical with varying structural parameters and material selections. Test dies having an area of 0.5 cm2 was embedded in a 500 μm-thick silicon carrier following the P-eSiFO process. After careful parameters optimization chip warpage can effectively decrease by over 60%. Experimental results showed that the height difference between the embedded chip and its silicon interposer can be reduced down to 1 μm with optimized parameters after high-temperature processes. This work provides useful insights for addressing multi-material warpage concerns during thermal processes in advanced packaging.

  • Open Access

    High‐Viability Circulating Tumor Cells Sorting From Whole Blood at Single Cell Level Using Laser‐Induced Forward Transfer‐Assisted Microfiltration

    by Qingmei Xu, Yuntong Wang, Songtao Dou, Yang Xu, Zhenhe Xu, Han Xu, Yi Zhang, Yanming Xia, Ying Xue, Hang Li, et al.

    The efficient isolation and molecular analysis of circulating tumor cells (CTCs) from whole blood at single‐cell level are crucial for understanding tumor metastasis and developing personalized treatments. The viability of isolated cells is the key prerequisite for the downstream molecular analysis, especially for RNA sequencing. This study develops a laser‐induced forward transfer ‐assisted microfiltration system (LIFT‐AMFS) for high‐viability CTC enrichment and retrieval from whole blood. The LIFT‐compatible double‐stepped microfilter (DSMF), central to this system, comprises two micropore layers: the lower layer's smaller micropores facilitate size‐based cell separation, and the upper layer's larger micropores enable liquid encapsulating captured cells. By optimizing the design of the DSMFs, the system has a capture efficiency of 88% at the processing throughput of up to 15.0 mL min−1 during the microfilter‐based size screening stage, with a single‐cell yield of over 95% during the retrieval stage. The retrieved single cells, with high viability, are qualified for ex vivo culture and direct RNA sequencing. The cDNA yield from isolated CTCs surpassed 4.5 ng, sufficient for library construction. All single‐cell sequencing data exhibited Q30 scores above 95.92%. The LIFT‐AMFS shows promise in cellular and biomedical research.


  • Stretchable silicon array with stretchability at 66.1% ± 2.9% and silicon areal coverage of 71.5% enabled by wafer-level microfabrication strategy

    by Han Xu, Lang Chen, Meixuan Zhang, Yufeng Jin, Wei Wang

    High-performance and massive manufacturing are the key objectives of stretchable electronics manufacturing technology. However, the limitations of the current manufacturing technologies in terms of silicon areal coverage and stretchability impose the tradeoff between high-performance and massive manufacturing. This work proposes a silicon wafer-level microfabrication strategy to fabricate stretchable silicon arrays, leveraging the parylene microelectromechanical systems compatible microfabrication capability and the established mechanical analytical models of the 3D micro-Kirigami structure. This wafer-level fabrication strategy yielded monolithic stretchable silicon arrays with high silicon areal coverage (71.5%) and high stretchability (66.1% ± 2.9%). The mechanical analytical models suggest the potential for simultaneously increased Si areal coverage and stretchability by leveraging miniaturization capability. This technique holds immense promise for high-performance stretchable arrayed devices with shape-adaptivity for complex or dynamic surfaces.


  • Open Access

    Copolymerization of Parylene C and Parylene F to Enhance Adhesion and Thermal Stability without Coating Performance Degradation

    by Han Xu, Zhou Yang, Yechang Guo, Qingmei Xu, Songtao Dou, Pan Zhang, Yufeng Jin, Jiajie Kang, Wei Wang

    Parylene C has been widely used in the fields of microelectromechanical systems (MEMS) and electronic device encapsulation because of its unique properties, such as biocompatibility and conformal coverage. However, its poor adhesion and low thermal stability limit its use in a wider range of applications. This study proposes a novel method for improving the thermal stability and enhancing the adhesion between Parylene and Si by copolymerizing Parylene C with Parylene F. The successful preparation of Parylene copolymer films containing different ratios of Parylene C and Parylene F was confirmed using Fourier-transform infrared spectroscopy and surface energy calculations. The proposed method resulted in the copolymer film having an adhesion 10.4 times stronger than that of the Parylene C homopolymer film. Furthermore, the friction coefficients and cell culture capability of the Parylene copolymer films were tested. The results indicated no degradation compared with the Parylene C homopolymer film. This copolymerization method significantly expands the applications of Parylene materials.


  • Silicon-Based Stretchable Structure via Parylene Kirigami Interconnection

    by Han Xu, Meixuan Zhang, Lang Chen, Pan Zhang, Yufeng Jin, Wei Wang

    High-performance stretchable electronics are attracting great attention due to the mechanical adaptability, but are still limited to achieving highly-integrable, high density, high-performance stretchable silicon-based electronics. This paper proposed a Parylene Kirigami structure as a stretchable interconnection to connect silicon (Si) units in an array. The equivalent Young’s modulus and stretchability model of the Parylene Kirigami were developed and verified numerically and experimentally. As a preliminary demonstration, a Parylene Kirigami structure-based stretchable Si array (Parylene KiSS array) was successfully fabricated by the wafer-scale microelectromechanical systems (MEMS) process with a high Si areal coverage of 68.8 % and the stretchability of 31.0 $\pm$ 1.1%. The equivalent Young’s modulus of this Parylene KiSS array was 130.88 $\pm$ 6.75 MPa, which was estimated precisely by the proposed model and was around 1000 times smaller than that of the intrinsic silicon. This MEMS process compatible stretchable electronics strategy can integrate Si-based high-performance chiplets, sensors and actuators to realize high-performance stretchable microsystems. 2022-0157


  • Optimized chemical mechanical polishing of Parylene C for high-density wiring in flexible electronics

    by Lang Chen, Han Xu, Xiao Han, Peiyue Li, Pan Zhang, Haoran Zhao, Yufeng Jin, Jinwen Zhang, Wei Wang

    With the rapid development of flexible electronics, an increasing number of microfabrication strategies originating from the Si-based integrated circuits field have been explored on organic materials. Parylene C, a polymer, has been widely used in the microelectromechanical systems field because of its outstanding fabrication merits, such as room-temperature processability, conformal coating, and precise thin film deposition capability with the thickness tunable from 1 nm to 100 μ m. As a good dielectric material, the Parylene C is also suitable for interlayer dielectrics in flexible electronics. This study develops an optimized chemical mechanical polishing (CMP) technique of Parylene C for high-density redistribution wiring in high-performance flexible electronics. The roughness of the Parylene C surface after CMP was as low as 14.3 ± 1.5 Å. The problems of slurry pollution and mechanical failure of the Parylene film that degrade the dielectric performance of the Parylene C could be avoided by taking the optimized CMP method. The multi-material structure constructed by Parylene C, Silicon and electroplated Copper was prepared and polished using the optimized CMP process. Additionally, a flexible wiring sample has been successfully patterned by the Damascene process through the optimized CMP process. In this sample, both the distance between each wire and the wire width were as small as 5 μ m. The optimized Parylene C CMP process is easy-to-realize, highly efficient, low cost, and with minor defects; it provides a promising way to achieve high-density interconnection in high-performance flexible electronic devices.