Abstract
This work demonstrates the development of adsorptive nanocomposite membranes for the efficient removal of cationic dye from water. The bio‐based adsorptive membrane is prepared using polyvinyl alcohol (PVA) and polydopamine (PDA)‐modified cellulose nanocrystals (PDA@CNCs) supported on a Whatman filter paper via vacuum filtration. The structural characterizations, surface morphology, effects of different operational parameters on methylene blue (MB) dye adsorption by the PVA/PDA@CNC membranes are evaluated. The synthesized membrane with PVA to PDA@CNC feed ratio at 50/50 (PVA/PDA@CNC‐50/50) achieved 98.2% removal efficiency and 1.18 mg g −1 adsorption capacity in 48 h. under the optimized conditions. The adsorption study under shaking at 150 RPM speed further enhanced the membrane performance, exhibiting 93.2% removal efficiency within 8 h of contact time. Regeneration studies demonstrated that the PVA/PDA@CNC = 50/50 membrane maintained over 95% removal efficiency even after five adsorption‐desorption cycles. The pseudo second‐order model best described the kinetics of the adsorption process of the nanocomposite membranes. The experimental data also fitted well with the Freundlich isotherm model predicting that the adsorbent has multilayer adsorption sites on its heterogeneous surface. The nanocomposite membrane also shows good removal performance for Janus Green B, thus displaying its versatility in adsorbing different cationic dyes from water.
Funding Information
  • Indian Institute of Science Education and Research Bhopal

This publication has 62 references indexed in Scilit: