Determination of Corrosion Resistance of High-Silicon Ductile Iron Alloyed with Nb
Authors:
- Carlos Rodrigo Muñiz ValdezCarlos Rodrigo Muñiz Valdez
- Daniel García NavarroDNDaniel García Navarro
- Jesús Salvador Galindo ValdésJesús Salvador Galindo Valdés
- Félix Alan Montes GonzálezFélix Alan Montes González
- Efrain Almanza CasasECEfrain Almanza Casas
- Nelly Abigail Rodríguez RosalesNRNelly Abigail Rodríguez Rosales
Open Access
Abstract
In this study, the effects of Nb on the microstructural characteristics, hardness, and corrosion resistance of high-silicon ductile cast iron (HSDI)-3.6 wt.% Si were investigated. Samples from different castings with 0–0.9 wt.% Nb were obtained and compared to a commercial ductile iron. Microstructures showed that the amount of ferrite in the matrix increased with increasing Nb content, from 34% for unalloyed HSDI to 88% for HSDI-0.9 wt.% Nb. The presence of randomly distributed NbC carbides was identified by EDX for all the samples alloyed with Nb, and the hardness of the HSDI increased with the Nb content. To evaluate the influence of the Nb content on the corrosion resistance of HSDI, potentiodynamic tests were carried out in a solution of H2SO4. The highest corrosion rate on HSDI was obtained for the HSDI-0.3 wt.% Nb sample, with 2802 mills per year, due to the amount of pearlite present and the lowest presence of NbC carbides, compared to the HSDI-0.9 wt.% Nb, with 986 mills per year. This behavior was attributed to the ferrite matrix obtained because of a high Si content in the DI, which delayed the anodic dissolution of the alloy and suppressed the pearlitizing effect of Nb for contents greater than 0.3 wt.%, as well as to the effect of NbC carbides, which acted as inhibitors.Keywords
Funding Information
- Tecnológico Nacional de México (11548.21-P)
This publication has 49 references indexed in Scilit:
- As cast high silicon ductile irons with optimised mechanical properties and remarkable fatigue propertiesMaterials Science and Technology, 2014
- Revisión de fenómenos de orden en aleaciones hierro-silicioRevista de Metalurgia, 2013
- Development of High Strength Ductile Iron with Niobium AdditionAdvanced Materials Research, 2012
- Effects of nickel on low-temperature impact toughness and corrosion resistance of high-ductility ductile ironMaterials & Design (1980-2015), 2012
- Existence of Niobium in Ductile Iron and Its Effect on the Morphology of Graphite Ball2012
- High Silicon Ductile Iron: Possible Uses in the Production of Parts with ^|^ldquo;Dual Phase ADI^|^rdquo; MicrostructureISIJ International, 2012
- Influence of Mold Preheating and Silicon Content on Microstructure and Casting Properties of Ductile Iron in Permanent MoldJournal of Iron and Steel Research International, 2011
- Corrosion behaviour and structure of the surface layer formed on austempered ductile iron in concentrated sulphuric acidCorrosion Science, 2006
- CORROSION KINETICS2006
- A Model for the Graphite Formation in Ductile Cast Iron: Part I. Inoculation MechanismsMetallurgical Transactions A, 1993