Nelly Abigaíl Rodríguez-Rosales
Research Subjects
Nelly Abigaíl Rodríguez-Rosales has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Rodrigo Muñiz-Valdez
Facultad de Ingeniería, Universidad Autónoma de Coahuila, Arteaga 25350, Coahuila, Mexico
4 shared publications - Jesús Fernando Martínez-Villafañe
Facultad de Ingeniería, Universidad Autónoma de Coahuila, Arteaga 25350, Coahuila, Mexico
4 shared publications - Jesús Salvador Galindo-Valdés
Facultad de Ingeniería, Universidad Autónoma de Coahuila, Arteaga 25350, Coahuila, Mexico
4 shared publications - Josué Gómez-Casas
Faculty of Engineering, Autonomous University of Coahuila, Blvd. Fundadores km 13 University City, Arteaga 25350, Mexico
3 shared publications - Carlos A. Toro-Arcila
Faculty of Engineering, Universidad Autónoma de Coahuila, Fundadores Km. 13, Las Glorias, Ciudad Universitaria, Arteaga 25350, Coahuila, Mexico
2 shared publications - Christian Javier Cabello Alvarado
Centro de Investigación en Química Aplicada, Saltillo 25294, Coahuila, Mexico
2 shared publications
Latest Publications
- Open Access
- 20 October 2026
- Published by MDPI AG in Inorganics
- Vol. 14 (10) , 266
Surface Modification of ZnO Nanoparticles with L-Serine and Preliminary Antibacterial Properties Against Escherichia coli
Due to bacterial mutation and evolution to survive and to the misuse of antibiotics, there is greater resistance to different medications among different bacteria. This study presents the modification of ZnO nanoparticles with L-serine via ultrasound, their physicochemical evaluation, and antibacterial performance against Escherichia coli (E. coli). Among the most significant results are: by FT-IR, a union between the carbonyl and amino groups of two L-serine amino acids was observed, indicating the formation of a peptide bond corresponding to amide group II. In the TGA of the samples modified with L-serine, weight losses between 360 and 455 °C were observed, supporting that the chemical modification was effective for both reaction times (60 and 90 min). In XRD, it could be observed that the characteristic peak of L-serine is at 22.8°, and there are other signals that oscillate between 10 and 20° of the peptide interlaces formed between the amino acids present in the modified particles. XPS analysis showed that, for the samples modified with L-serine, the N1s and C1s signals appeared, and deconvolution was performed for these signals in order to see their interactions in the chemical environment. The value of zeta potential of the sample ZnOMOD90 showed a bigger change. TEM images indicated that the ZnO pure nanoparticles have a hemispherical morphology and a size of approximately 24 nm, while ZnOMOD90 nanoparticles have a size of approximately 53 nm. Modified ZnO nanoparticles increased the inhibition zone halo for the ZnOMOD90 sample to 31 mm against E. coli bacteria, compared to pure ZnO, which had an inhibition zone of only 1 mm.
- 20 October 2026
- Published by MDPI AG in Inorganics
- Vol. 14 (10) , 266
Open AccessSurface Modification of ZnO Nanoparticles with L-Serine and Preliminary Antibacterial Properties Against Escherichia coli
Due to bacterial mutation and evolution to survive and to the misuse of antibiotics, there is greater resistance to different medications among different bacteria. This study presents the modification of ZnO nanoparticles with L-serine via ultrasound, their physicochemical evaluation, and antibacterial performance against Escherichia coli (E. coli). Among the most significant results are: by FT-IR, a union between the carbonyl and amino groups of two L-serine amino acids was observed, indicating the formation of a peptide bond corresponding to amide group II. In the TGA of the samples modified with L-serine, weight losses between 360 and 455 °C were observed, supporting that the chemical modification was effective for both reaction times (60 and 90 min). In XRD, it could be observed that the characteristic peak of L-serine is at 22.8°, and there are other signals that oscillate between 10 and 20° of the peptide interlaces formed between the amino acids present in the modified particles. XPS analysis showed that, for the samples modified with L-serine, the N1s and C1s signals appeared, and deconvolution was performed for these signals in order to see their interactions in the chemical environment. The value of zeta potential of the sample ZnOMOD90 showed a bigger change. TEM images indicated that the ZnO pure nanoparticles have a hemispherical morphology and a size of approximately 24 nm, while ZnOMOD90 nanoparticles have a size of approximately 53 nm. Modified ZnO nanoparticles increased the inhibition zone halo for the ZnOMOD90 sample to 31 mm against E. coli bacteria, compared to pure ZnO, which had an inhibition zone of only 1 mm.
- Open Access
Sonochemical Modification of ZrO2 Nanoparticles with Thiamine Hydrochloride for the Development of Films with PLA for the Adsorption of Hexavalent Chromium
Industrial wastewater can be reused in other everyday processes to help combat water scarcity worldwide. One contaminant in industrial wastewater is hexavalent chromium, which is highly toxic and can cause kidney, liver, and respiratory problems, making its removal vital. In this study, PLA-based films containing modified zirconia nanoparticles were developed via a solution-mixing process for hexavalent chromium adsorption. Obtaining the films involved two stages: the first was the chemical modification of ZrO2 nanoparticles with thiamine hydrochloride (vitamin B1) using fixed-frequency ultrasound at an output of 750 W and 50% amplitude for 60 min. The second stage involved preparing the films by mixing them in the solution using an ultrasonic bath. The nanoparticle concentrations were 0.25, 0.5, and 1 wt%. The results obtained from characterization using Fourier-transform infrared spectroscopy (FT-IR) revealed the characteristic bands of PLA and the characteristic peak of the Zr-O bond corresponding to the ZrO2 nanoparticles. Thermogravimetric analysis (TGA) showed that the ZrO2 nanoparticles provided thermal stability to the PLA polymer. X-ray diffraction (XRD) showed a broad peak of amorphous PLA at 16.8° and signals corresponding to the crystalline phase of ZrO2. The morphology of a cross-section of the films was observed using scanning electron microscopy (SEM), revealing a rough surface with pores. Finally, hexavalent chromium adsorption tests were carried out, measuring the adsorption efficiency under the parameters of pH, concentration, and contact time. The PLAZrO2 sample achieved an adsorption efficiency of 83% at pH 2.
Open AccessSonochemical Modification of ZrO2 Nanoparticles with Thiamine Hydrochloride for the Development of Films with PLA for the Adsorption of Hexavalent Chromium
Industrial wastewater can be reused in other everyday processes to help combat water scarcity worldwide. One contaminant in industrial wastewater is hexavalent chromium, which is highly toxic and can cause kidney, liver, and respiratory problems, making its removal vital. In this study, PLA-based films containing modified zirconia nanoparticles were developed via a solution-mixing process for hexavalent chromium adsorption. Obtaining the films involved two stages: the first was the chemical modification of ZrO2 nanoparticles with thiamine hydrochloride (vitamin B1) using fixed-frequency ultrasound at an output of 750 W and 50% amplitude for 60 min. The second stage involved preparing the films by mixing them in the solution using an ultrasonic bath. The nanoparticle concentrations were 0.25, 0.5, and 1 wt%. The results obtained from characterization using Fourier-transform infrared spectroscopy (FT-IR) revealed the characteristic bands of PLA and the characteristic peak of the Zr-O bond corresponding to the ZrO2 nanoparticles. Thermogravimetric analysis (TGA) showed that the ZrO2 nanoparticles provided thermal stability to the PLA polymer. X-ray diffraction (XRD) showed a broad peak of amorphous PLA at 16.8° and signals corresponding to the crystalline phase of ZrO2. The morphology of a cross-section of the films was observed using scanning electron microscopy (SEM), revealing a rough surface with pores. Finally, hexavalent chromium adsorption tests were carried out, measuring the adsorption efficiency under the parameters of pH, concentration, and contact time. The PLAZrO2 sample achieved an adsorption efficiency of 83% at pH 2.
- Open Access
Data-Driven Model for Cyclic Tasks of Robotic Systems: Study of the Repeatability Conditions
Ensuring repeatability in robotic manipulators is critical for industrial applications, particularly in cyclic tasks where precision and consistency are required. This study aims to establish the conditions that are necessary for repeatability in data-driven task-space control, compare repeatability across redundant robotic manipulators, and reduce the computational costs associated with data-based control methods compared to traditional model-based approaches. To achieve this, a large number of cyclic actions are simulated, mimicking real-world industrial routines. The methodology evaluates the estimated Jacobian matrix’s manipulability and its role in facilitating effective task execution within the operational space of the robot. The results demonstrate that the proposed approach achieves consistent repeatability at the full pose level of the end-effector, integrating both position and orientation. In particular, the findings indicate that the proposed controller minimizes variability and ensures reliable motion execution, even in the presence of system redundancies, as observed in the eight-DoF KUKA YouBot manipulator. These insights contribute to advancing data-driven control strategies for redundant robotic systems, enhancing their applicability in industrial settings.
Open AccessData-Driven Model for Cyclic Tasks of Robotic Systems: Study of the Repeatability Conditions
Ensuring repeatability in robotic manipulators is critical for industrial applications, particularly in cyclic tasks where precision and consistency are required. This study aims to establish the conditions that are necessary for repeatability in data-driven task-space control, compare repeatability across redundant robotic manipulators, and reduce the computational costs associated with data-based control methods compared to traditional model-based approaches. To achieve this, a large number of cyclic actions are simulated, mimicking real-world industrial routines. The methodology evaluates the estimated Jacobian matrix’s manipulability and its role in facilitating effective task execution within the operational space of the robot. The results demonstrate that the proposed approach achieves consistent repeatability at the full pose level of the end-effector, integrating both position and orientation. In particular, the findings indicate that the proposed controller minimizes variability and ensures reliable motion execution, even in the presence of system redundancies, as observed in the eight-DoF KUKA YouBot manipulator. These insights contribute to advancing data-driven control strategies for redundant robotic systems, enhancing their applicability in industrial settings.
- Open Access
Data-Driven Kinematic Model for the End-Effector Pose Control of a Manipulator Robot
This paper presents a data-driven kinematic model for the end-effector pose control applied to a variety of manipulator robots, focusing on the entire end-effector’s pose (position and orientation). The measured signals of the full pose and their computed derivatives, along with a linear combination of an estimated Jacobian matrix and a vector of joint velocities, generate a model estimation error. The Jacobian matrix is estimated using the Pseudo Jacobian Matrix (PJM) algorithm, which requires tuning only the step and weight parameters that scale the convergence of the model estimation error. The proposed control law is derived in two stages: the first one is part of an objective function minimization, and the second one is a constraint in a quasi-Lagrangian function. The control design parameters guarantee the control error convergence in a closed-loop configuration with adaptive behavior in terms of the dynamics of the estimated Jacobian matrix. The novelty of the approach lies in its ability to achieve superior tracking performance across different manipulator robots, validated through simulations. Quantitative results show that, compared to a classical inverse-kinematics approach, the proposed method achieves rapid convergence of performance indices (e.g., Root Mean Square Error (RMSE) reduced to near-zero in two cycles vs. a steady-state RMSE of 20 in the classical approach). Additionally, the proposed method minimizes joint drift, maintaining an RMSE of approximately 0.3 compared to 1.5 under the classical scheme. The control was validated by means of simulations featuring an UR5e manipulator with six Degrees of Freedom (DOF), a KUKA Youbot with eight DOF, and a KUKA Youbot Dual with thirteen DOF. The stability analysis of the closed-loop controller is demonstrated by means of the Lyapunov stability conditions.
Open AccessData-Driven Kinematic Model for the End-Effector Pose Control of a Manipulator Robot
This paper presents a data-driven kinematic model for the end-effector pose control applied to a variety of manipulator robots, focusing on the entire end-effector’s pose (position and orientation). The measured signals of the full pose and their computed derivatives, along with a linear combination of an estimated Jacobian matrix and a vector of joint velocities, generate a model estimation error. The Jacobian matrix is estimated using the Pseudo Jacobian Matrix (PJM) algorithm, which requires tuning only the step and weight parameters that scale the convergence of the model estimation error. The proposed control law is derived in two stages: the first one is part of an objective function minimization, and the second one is a constraint in a quasi-Lagrangian function. The control design parameters guarantee the control error convergence in a closed-loop configuration with adaptive behavior in terms of the dynamics of the estimated Jacobian matrix. The novelty of the approach lies in its ability to achieve superior tracking performance across different manipulator robots, validated through simulations. Quantitative results show that, compared to a classical inverse-kinematics approach, the proposed method achieves rapid convergence of performance indices (e.g., Root Mean Square Error (RMSE) reduced to near-zero in two cycles vs. a steady-state RMSE of 20 in the classical approach). Additionally, the proposed method minimizes joint drift, maintaining an RMSE of approximately 0.3 compared to 1.5 under the classical scheme. The control was validated by means of simulations featuring an UR5e manipulator with six Degrees of Freedom (DOF), a KUKA Youbot with eight DOF, and a KUKA Youbot Dual with thirteen DOF. The stability analysis of the closed-loop controller is demonstrated by means of the Lyapunov stability conditions.
- 14 March 2024
- Published by Springer Nature in International Journal of Metalcasting
- Vol. 19 (1) , 227-244
Effect of Austempering Conditions on the Corrosion Behavior of HSADI Alloyed with Niobium
- 14 March 2024
- Published by Springer Nature in International Journal of Metalcasting
- Vol. 19 (1) , 227-244
Effect of Austempering Conditions on the Corrosion Behavior of HSADI Alloyed with Niobium
- Open Access
Determination of Corrosion Resistance of High-Silicon Ductile Iron Alloyed with Nb
In this study, the effects of Nb on the microstructural characteristics, hardness, and corrosion resistance of high-silicon ductile cast iron (HSDI)-3.6 wt.% Si were investigated. Samples from different castings with 0–0.9 wt.% Nb were obtained and compared to a commercial ductile iron. Microstructures showed that the amount of ferrite in the matrix increased with increasing Nb content, from 34% for unalloyed HSDI to 88% for HSDI-0.9 wt.% Nb. The presence of randomly distributed NbC carbides was identified by EDX for all the samples alloyed with Nb, and the hardness of the HSDI increased with the Nb content. To evaluate the influence of the Nb content on the corrosion resistance of HSDI, potentiodynamic tests were carried out in a solution of H2SO4. The highest corrosion rate on HSDI was obtained for the HSDI-0.3 wt.% Nb sample, with 2802 mills per year, due to the amount of pearlite present and the lowest presence of NbC carbides, compared to the HSDI-0.9 wt.% Nb, with 986 mills per year. This behavior was attributed to the ferrite matrix obtained because of a high Si content in the DI, which delayed the anodic dissolution of the alloy and suppressed the pearlitizing effect of Nb for contents greater than 0.3 wt.%, as well as to the effect of NbC carbides, which acted as inhibitors.
Open AccessDetermination of Corrosion Resistance of High-Silicon Ductile Iron Alloyed with Nb
In this study, the effects of Nb on the microstructural characteristics, hardness, and corrosion resistance of high-silicon ductile cast iron (HSDI)-3.6 wt.% Si were investigated. Samples from different castings with 0–0.9 wt.% Nb were obtained and compared to a commercial ductile iron. Microstructures showed that the amount of ferrite in the matrix increased with increasing Nb content, from 34% for unalloyed HSDI to 88% for HSDI-0.9 wt.% Nb. The presence of randomly distributed NbC carbides was identified by EDX for all the samples alloyed with Nb, and the hardness of the HSDI increased with the Nb content. To evaluate the influence of the Nb content on the corrosion resistance of HSDI, potentiodynamic tests were carried out in a solution of H2SO4. The highest corrosion rate on HSDI was obtained for the HSDI-0.3 wt.% Nb sample, with 2802 mills per year, due to the amount of pearlite present and the lowest presence of NbC carbides, compared to the HSDI-0.9 wt.% Nb, with 986 mills per year. This behavior was attributed to the ferrite matrix obtained because of a high Si content in the DI, which delayed the anodic dissolution of the alloy and suppressed the pearlitizing effect of Nb for contents greater than 0.3 wt.%, as well as to the effect of NbC carbides, which acted as inhibitors.
- 1 February 2008
- Published by Elsevier in Materials Letters
- Vol. 62 (4-5) , 637-640
A kinetic study of the strontium extraction by metallothermic reduction using submerged SrO powders injection
- 1 February 2008
- Published by Elsevier in Materials Letters
- Vol. 62 (4-5) , 637-640
A kinetic study of the strontium extraction by metallothermic reduction using submerged SrO powders injection