Influences of post-weld artificial aging on microstructural and tensile properties of friction stir-welded Al-Zn-Mg-Si-Cu aluminum alloy joints
Open Access
- 20 August 2024
- journal article
- Published by International Advanced Researches and Engineering Journal in International Advanced Researches and Engineering Journal
- Vol. 8 (2) , 76-83
Abstract
In this study, the effect of heat treatment on the mechanical and microstructural properties of welded joints after friction stir welding of age-hardenable Al-Zn-Mg-Si-Cu wrought aluminum alloy plates was investigated. For this purpose, some of the samples welded using FSW technique with a rotational speed of 1250 rpm and a traverse speed of 40 mm·min-1 were subjected to annealing and some to artificial aging heat treatment at different temperatures and times. In FSWed artificial aged samples where AlFeSi precipitate formations were detected, hardness and strength increase were realized with grain-boundary strengthening and Orowan hardening mechanisms. The lowest ultimate tensile strength was 156.3 N·mm-2 in the annealed sample, while the highest ultimate tensile strength was 210.8 N·mm-2 in the sample artificially aged at 190 °C for 2 hours. Fractographic examination revealed that ductile fracture occurred in all specimens.Keywords
This publication has 54 references indexed in Scilit:
- Post-weld heat treatment effects on microstructure, crystal structure, and mechanical properties of donor stir–assisted friction stir welding material of AA6061-T6 alloyThe International Journal of Advanced Manufacturing Technology, 2023
- Effect of Changing Heat Treatment Conditions on Microstructural and Mechanical Properties of Friction Stir Welded Sheets of AA2024 with Interlayer Strip Width AA7075Journal of Failure Analysis and Prevention, 2020
- On the Effect of Quenching on Postweld Heat Treatment of Friction-Stir-Welded Aluminum 7075 AlloyJournal of Materials Engineering and Performance, 2019
- Effect of Friction Stir Welding Process Parameters on Microstructure and Mechanical Properties of Dissimilar AA6061-T6 and AA7075-T6 Aluminum Alloy JointsMetallography, Microstructure, and Analysis, 2016
- Effects of Initial Temper Condition and Postweld Heat Treatment on the Properties of Dissimilar Friction-Stir-Welded Joints between AA7075 and AA6061 Aluminum AlloysMetallurgical and Materials Transactions A, 2014
- Aerospace Applications of Aluminum–Lithium Alloys2014
- Investigation into the Influence of Post-Weld Heat Treatment on the Friction Stir Welded AA6061 Al-Alloy Plates with Different Temper ConditionsMetallurgical and Materials Transactions A, 2013
- Effect of welding processes on tensile properties of AA6061 aluminium alloy jointsThe International Journal of Advanced Manufacturing Technology, 2009
- Microstructural modification of as-cast Al-Si-Mg alloy by friction stir processingMetallurgical and Materials Transactions A, 2006
- Precipitation sequence in friction stir weld of 6063 aluminum during agingMetallurgical and Materials Transactions A, 1999