3-D -Printed Dielectric Slab Rectangular Waveguide for TE 10 and TE 20 Mode Equalization
- 3 June 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (12) , 6914-6924
Abstract
The dielectric slab rectangular waveguide (DSRW) has been widely studied and used for increasing the single-mode bandwidth (BW) of rectangular waveguides. This work presents a DSRW for equalizing the group velocity of the first two propagating modes in the structure. Suitably scaled, this DSRW design can be used in chip-to-chip communications to yield interconnects that avoid dispersion while enhancing the BW density of these systems. A theoretical analysis is introduced to show the equalization BW attained depending on the slab dimensions with regard to the rectangular waveguide width and the dielectric permittivity of the materials that fill the waveguide. A proof of concept slab rectangular waveguide is designed to meet a 45% equalization BW around a center frequency of 10.0 GHz. The design is scalable and can be adapted to fit the dielectric permittivity of available materials. Several waveguide sections were fabricated using additive manufacturing (AM) techniques and two dielectric materials with different permittivities. Simulations and measurements confirm the waveguide behavior at the design frequency range. TE $_{10}$ and TE $_{20}$ modes exhibit the same group velocity of 0.36 $\times$ $c_{0}$ at 7.95 GHz.Keywords
Funding Information
- Conselleria de Educación, Universidades y Empleo Joint Project (CIAICO/2022/068)
- AEI (Spanish ‘Agencia Estatal de Investigación’ (CIAICO/2022/068, Project)
This publication has 28 references indexed in Scilit:
- 3D-Printed Electromagnetic Band-Gap Band-Pass Filter Based on Empty Single-Ridge WaveguideIEEE Access, 2022
- 1 Tbit/s/ $\lambda$ Transmission Over a 130 km Link Consisting of Graded-Index $50\ \mu\mathrm{m}$ Core Multi-Mode Fiber and 6LP Few-Mode Fiber2020
- Dispersion-Minimized Rod and Tube Dielectric Waveguides at $W$ -Band and $D$ -Band FrequenciesIEEE Microwave and Wireless Components Letters, 2018
- Fully packaged millimetre‐wave dielectric waveguide with multimodal excitationElectronics Letters, 2015
- A D-band chip-to-waveguide-horn (CWH) antenna with 18.9 dBi gain using CMOS technology2015
- 1.25 Gbit/s Over 50 m Step-Index Plastic Optical Fiber Using a Fully Integrated Optical Receiver With an Integrated EqualizerJournal of Lightwave Technology, 2011
- Si photonics technology for future optical interconnection2011
- Dispersion-Equalization Techniques for Substrate Integrated Waveguide InterconnectsIEEE Transactions on Microwave Theory and Techniques, 2010
- Design and Application of Multimode Substrate Integrated Waveguides in Parallel Multichannel Signaling SystemsIEEE Transactions on Microwave Theory and Techniques, 2009
- Complex permittivity determination from propagation constant measurementsIEEE Microwave and Guided Wave Letters, 1999