A Kinematic Prototype of a Compliant Artificial Prosthetic Knee Joint
Open Access
- 9 September 2025
- journal article
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Journal of Automation, Mobile Robotics and Intelligent Systems
- p. 82-88
Abstract
This study presents the development and kinematic evaluation of a compliant artificial knee joint prototype fabricated using multi-material 3D printing. The design integrates a rolling-contact compliant mechanism—derived from the CORE and D-CORE concepts—into a prosthetic knee construction, aiming to replicate biological joint behavior while reducing weight, mechanical complexity, and friction. The prototype underwent iterative refinement, including geometric modifications, material selection for flexure bands, and structural asymmetry to mitigate overextension and increase durability. The resulting joint exhibited hybrid kinematic characteristics, blending features of both single-axis and polycentric knee mechanisms, and achieved a functional flexion range of approximately 142 degrees. Initial cyclic tests confirmed satisfactory stiffness and shape recovery of flexure bands with optimized dimensions, although long-term fatigue performance remains a challenge. A basic spring-damper system was also integrated, potentially aligning the prototype with K-1/K-2 prosthetic classification. However, full validation requires further mechanical testing in accordance with ISO 10328 standards, as well as optimization of the damping system for commercial viability. This research demonstrates the feasibility and potential of compliant mechanisms in lower-limb prosthetics while identifying critical areas for future development.Keywords
This publication has 15 references indexed in Scilit:
- Overcoming Challenges and Innovations in Orthopedic Prosthesis Design: An Interdisciplinary PerspectiveBiomedical Materials & Devices, 2023
- Design of a modular and compliant wrist module for upper limb prostheticsThe Anatomical Record, 2022
- A Systematic Review of Compliant Mechanisms as Orthopedic ImplantsJournal of Medical Devices, 2021
- Kinetostatic and Dynamic Modeling of Flexure-Based Compliant Mechanisms: A SurveyApplied Mechanics Reviews, 2020
- Clinical Assessment of Gait2020
- The Influence of Prosthetic Knee Joints on Gait2018
- Kinematics of the Normal Native Knee2017
- Curved-folding-inspired deployable compliant rolling-contact element (D-CORE)Mechanism and Machine Theory, 2016
- Designing prosthetic knee joints with bio-inspired bearing surfacesTribology International, 2014
- Tension-based multi-stable compliant rolling-contact elementsMechanism and Machine Theory, 2010