Development of Internal Tin Nb3Sn Strand for CRAFT in WST
- 6 February 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-4
Abstract
Western Superconducting Technologies Co. Ltd. (WST) has developed several types of internal tin (IT) process Nb 3 Sn strands for the Comprehensive Research Facility for Fusion Technology (CRAFT) project. By increasing the number of niobium filaments and the tin content, the Nb 3 Sn phase was more effectively formed after heat treatment, thereby enhancing the critical current of the strands. The distribution of the niobium filaments was also optimized to minimize hysteresis loss. To date, WST has prepared over twenty tons of strands with a diameter of 0.99 mm for toroidal field (TF) coils. The critical current ranges from 370 A to 450 A at 12 T and 4.2 K. Additionally, the hysteresis loss ranges from 272 mJ/cm 3 to 567 mJ/cm 3 at ± 3 T and 4.2 K. Compared to ITER strands, the average hysteresis loss of 432 mJ/cm 3 was reduced by 10%. Furthermore, approximately eight tons of strands with a diameter of 0.82 mm have been produced for Superconducting Conductor Testing Facility. The critical current ranges from 293 A to 359 A at 12 T and 4.2 K, which is 20% higher on average than that of ITER strands. All the performances of the strands fabricated by WST meet the requirements of CRAFT project.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFB3804002, 2022YFF0707002)
- Shaanxi province important project (2020zdzx04-04-01)
This publication has 12 references indexed in Scilit:
- Recent progress in Chinese fusion research based on superconducting tokamak configurationThe Innovation, 2022
- Completion of JT-60SA construction and contribution to ITERNuclear Fusion, 2022
- The use of Nb 3 Sn in fusion: lessons learned from the ITER production including options for management of performance degradationSuperconductor Science and Technology, 2020
- Overview of the DEMO staged design approach in EuropeNuclear Fusion, 2019
- Heat Treatment and Structure Optimizations of Internal Tin Nb3Sn Superconducting Strands in WSTIEEE Transactions on Applied Superconductivity, 2018
- Ongoing Efforts at Internal-Tin Nb3Sn Strand With Higher Jcn and Lower Hysteresis LossIEEE Transactions on Applied Superconductivity, 2018
- Overview of the present progress and activities on the CFETRNuclear Fusion, 2017
- Statistical analysis of the Nb 3 Sn strand production for the ITER toroidal field coilsSuperconductor Science and Technology, 2017
- New Progress of Nb3Sn Strand Production for ITER in WSTIEEE Transactions on Applied Superconductivity, 2016
- Evolution of the ITER program and prospect for the next-step fusion DEMO reactors: status of the fusion energy R&D as ultimate source of energyJournal of Nuclear Science and Technology, 2013