Efficient and low-damage machining of Ti6Al4V: laser-assisted CBN belt grinding
Authors:
- 15 March 2023
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 39 (1) , 110-122
Abstract
This study introduces a new method for efficient and low-damage machining of Ti6Al4V: laser-assisted CBN belt grinding. The impact of laser power and grinding depth on the machining behavior of the material is investigated, the elemental distribution and chemical state of the ground surface are analyzed, and the removal mechanism of laser-assisted CBN belt grinding is described. The results show that increasing laser power will improve processing efficiency, enhance plastic material removal, and improve surface quality; the tangential grinding force is decreased by 63.5% and the normal grinding force is decreased by 72.6% at the maximum laser power; a large amount of Ti and N are present on the ground surface, and they are present in the form of TiN compounds. This study is a guide to the research on efficient and low-damage machining of hard-to-process materials like titanium alloys.Keywords
Funding Information
- National Natural Science Foundation of China (52175377)
- National Science and Technology Major Project (2017-VII-0002-0095)
This publication has 33 references indexed in Scilit:
- Advances in laser assisted machining of hard and brittle materialsJournal of Manufacturing Processes, 2020
- Cutting performance of cubic boron nitride-coated tools in dry turning of hardened ductile ironJournal of Manufacturing Processes, 2020
- Investigation on the grinding properties of high thermal conductivity vitrified bond CBN grinding wheel for titanium alloyThe International Journal of Advanced Manufacturing Technology, 2020
- Optimization of Cutting Data and Tool Inclination Angles During Hard Milling with CBN Tools, Based on Force Predictions and Surface Roughness MeasurementsMaterials, 2020
- The effect of cutting parameters and cutting tools on machining performance of carbon graphite materialMachining Science and Technology, 2020
- High performance hybrid machining of γ-TiAl with blasting erosion arc machining and grindingCIRP Annals, 2020
- Empirical modeling and optimization of process parameters in ultrasonic assisted laser micromachining of Ti–6Al–4VInternational Journal of Lightweight Materials and Manufacture, 2019
- Machinability of titanium alloy through laser machining: material removal and surface roughness analysisThe International Journal of Advanced Manufacturing Technology, 2019
- New Process Chain for the Production of Complex FreeformsOptik & Photonik, 2018
- The study on force, surface integrity, tool life and chip on laser assisted machining of inconel 718 using Nd:YAG laser sourceJournal of Advanced Research, 2017