CFD and Energy Loss Model Analysis of High-Speed Centrifugal Pump with Low Specific Speed
Open Access
- 24 July 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (15) , 7435
Abstract
High-speed centrifugal pumps with low specific speed have the characteristics of a small flowrate, a high head, and being compact and light weight, making them promising candidates for applications in the thermal management of aerospace and electronic devices. The energy loss in the low specific speed pump is critical and complex due to the large impeller diameter, the narrow and long flow channel, and the small outlet width. In this paper, an analysis method based on an energy loss model and computational fluid dynamics simulations (ELM/CFD) is proposed to analyze the performance of the low specific speed pump with a fully sealed structure. Experiments were carried out under variable water flowrates. The results show that the empirical correlation method failed to accurately predict the performance of high-speed centrifugal pumps, because the bearing clearance leakage and motor channel leakage are ignored. Moreover, the volume loss and hydraulic loss are calculated based on the empirical parameters of commonly used pumps that are different from the high-speed pump with the low specific speed in the complex flow channel structure. The ELM/CFD method calculates various loss power based on the simulation results and can predict the head and efficiency with deviations less than 2% and 5%, respectively. ELM/CFD can accurately analyze the optimization direction of the pump. The hydraulic loss and the volume loss of the impeller are the dominant factors that restrict the pump efficiency under the lower flowrates, while the hydraulic loss of subsequent flow channels becomes important under the larger flowrates.Keywords
Funding Information
- National Natural Science Foundation of China (51976150)
- Youth Innovation Team of Shaanxi Universities (51976150)
This publication has 18 references indexed in Scilit:
- Characteristics and internal flow of a low specific speed pump used as a turbineIOP Conference Series: Earth and Environmental Science, 2019
- Experiments on transient performance of a low specific speed centrifugal pump with open impellerProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2016
- CFD for Centrifugal Pumps: A Review of the State-of-the-ArtProcedia Engineering, 2013
- Direct and inverse iterative design method for centrifugal pump impellersProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2012
- Use of CFD Analyses to Predict Disk Friction Loss of Centrifugal Compressor ImpellersTRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, 2012
- The Flow Simulation and Experimental Study of Low-Specific-Speed High-Speed Complex Centrifugal ImpellersChinese Journal of Chemical Engineering, 2006
- Performance and Internal Flow Characteristics of a Very Low Specific Speed Centrifugal PumpJournal of Fluids Engineering, 2005
- Satellite Propellant Pump Research2005
- CALCULATION METHOD OF THE INCREASING COEFFICIENTS FOR LOW SPECIFIC-SPEED CENTRIFUGAL PUMPChinese Journal of Mechanical Engineering, 2005
- PIV measurement of internal flow characteristics of very low specific speed semi-open impellerExperiments in Fluids, 2004