First neutral beam injection experiments on KSTAR tokamak
Authors:
- 1 February 2012
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 83 (2) , 02B102
Abstract
The first neutral beam (NB) injection system of the Korea Superconducting Tokamak Advanced Research (KSTAR) tokamak was partially completed in 2010 with only 1/3 of its full design capability, and NB heating experiments were carried out during the 2010 KSTAR operation campaign. The ion source is composed of a JAEA bucket plasma generator and a KAERI large multi-aperture accelerator assembly, which is designed to deliver a 1.5 MW, NB power of deuterium at 95 keV. Before the beam injection experiments, discharge, and beam extraction characteristics of the ion source were investigated. The ion source has good beam optics in a broad range of beam perveance. The optimum perveance is 1.1–1.3 μP, and the minimum beam divergence angle measured by the Doppler shift spectroscopy is 0.8°. The ion species ratio is D+:D2+:D3+ = 75:20:5 at beam current density of 85 mA/cm2. The arc efficiency is more than 1.0 A/kW. In the 2010 KSTAR campaign, a deuterium NB power of 0.7–1.5 MW was successfully injected into the KSTAR plasma with a beam energy of 70–90 keV. L-H transitions were observed within a wide range of beam powers relative to a threshold value. The edge pedestal formation in the Ti and Te profiles was verified through CES and electron cyclotron emission diagnostics. In every deuterium NB injection, a burst of D-D neutrons was recorded, and increases in the ion temperature and plasma stored energy were found.Keywords
Funding Information
- Ministry of Education, Culture, Sports, Science, and Technology (2009-0082011)
This publication has 8 references indexed in Scilit:
- Diamagnetic loop measurement in Korea Superconducting Tokamak Advanced Research machineReview of Scientific Instruments, 2011
- Development of a plasma generator for a long pulse ion source for neutral beam injectorsReview of Scientific Instruments, 2011
- Design of neutral beam injection system for KSTAR tokamakFusion Engineering and Design, 2011
- Electron cyclotron emission diagnostics on KSTAR tokamakReview of Scientific Instruments, 2010
- KSTAR Charge Exchange Spectroscopy SystemIEEE Transactions on Plasma Science, 2010
- Numerical simulation for the accelerator of the KSTAR neutral beam ion sourceReview of Scientific Instruments, 2010
- Power requirement for accessing the H-mode in ITERJournal of Physics: Conference Series, 2008
- Study on an azimuthal line cusp ion source for the KSTAR neutral beam injectorReview of Scientific Instruments, 2008