Study on the Curing and Foaming of Surfactant-Modified Geopolymer Gels Based on Ash and Slag Waste from Coal Combustion
Open Access
Abstract
This study explores the influence of temperature–time conditions, surfactants, and varied waste compositions on the curing of geopolymer gels, a foam formation with the properties of porous geopolymers. Findings reveal that a 6 h curing period leads to a density of 435 kg/m3 and strength of 0.66 MPa, with notable improvements at 12 h. Comparing 12 to 24 h curing, differences in characteristics remain within 5%, highlighting the 12 h period as more energy-efficient. Sodium stearate-based samples exhibit excellent properties, significantly boosting strength while maintaining overall properties. Microwave curing achieves the lowest density (291 kg/m3) and closely parallels properties of samples cured conventionally for 12 h. However, it leads to complete destruction in sodium stearate-modified gels due to the Dumas reaction, making it unsuitable above 200 °C. Optimal properties emerge from compositions using sodium stearate and oven curing, achieving densities of 334 kg/m3 and strengths of 1.08 MPa (Severodvinsk CHPP-1) and 373 kg/m3 and 1.17 MPa (Novocherkassk SDPP). Although microwave curing allows for high energy efficiency, its high temperature demands necessitate careful material selection. This study offers insight into enhancing geopolymer properties while emphasizing the importance of tailored curing methods for sustainable material development.Keywords
Funding Information
- Russian Science Foundation (21-19-00203, 075-15-2022-1111)
- Ministry of Science and Higher Education of the Russian (21-19-00203, 075-15-2022-1111)
This publication has 67 references indexed in Scilit:
- High-porosity geopolymer membrane supports by peroxide route with the addition of egg white as surfactantCeramics International, 2017
- High strength metakaolin-based geopolymer foams with variable macroporous structureJournal of the European Ceramic Society, 2016
- Recent developments on inorganic polymers synthesis and applicationsCeramics International, 2016
- Fast microwave syntheses of fly ash based porous geopolymers in the presence of high alkali concentrationCeramics International, 2016
- Calcium-modified hierarchically porous aluminosilicate geopolymer as a highly efficient regenerable catalyst for biodiesel productionRSC Advances, 2015
- Mix design, properties and cost analysis of fly ash-based geopolymer foamConstruction and Building Materials, 2015
- Microwave synthesis of thermal insulating foams from coal derived bottom ashFuel Processing Technology, 2015
- Preparation and characterization of a reflective and heat insulative coating based on geopolymersEnergy and Buildings, 2015
- High strength metahalloysite based geopolymerComposites Part B: Engineering, 2014
- Effect of curing temperature on the development of hard structure of metakaolin-based geopolymerConstruction and Building Materials, 2010