Open-Leg Fault-Tolerant Control and Comparative Postfault Performance Analysis for Five-Phase Series-End Winding PMSM
- 30 April 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (11) , 11587-11601
Abstract
Compared with the Y-connection topology in five-phase motor drive, the open-leg fault will lead to unique postfault characteristics in series-end winding (SEW) topology, for which the most common used winding connection sequence (WCS) of ADBEC will lose the advantage of large speed range. This article newly proposes the open-leg fault-tolerant control for five-phase SEW permanent-magnet synchronous motor. First, the open-leg fault is divided into two types in SEW topology. For the type II fault, in terms of different postfault targets such as minimum copper loss and maximum torque, the harmonic current references are firstly derived for different WCSs. Then, the voltage compensation scheme is adopted to achieve the desired fault-tolerant currents. Subsequently, the postfault performance indicators are comparatively analyzed across different WCSs. It is concluded that under type II faulty condition, WCS of ABCDE can achieve the smaller fault-tolerant currents, less copper loss and same speed range comparing with ADBEC. In addition, the postfault performances of both type I and II faults are also theoretically compared with Y-connection and pentagon topologies. The experimental results are presented to verify the analysis and the conclusions, which can provide more basis for selecting which WCS in practical application of SEW topology.Keywords
Funding Information
- National Natural Science Foundation of China (52025073)
- Postgraduate Research & Practice Innovation Program of Jiangsu Province (KYCX22_3659)
This publication has 34 references indexed in Scilit:
- Series-End Winding Power Electronics Converter: Principles and ApplicationsIEEE Industrial Electronics Magazine, 2023
- Generalized Fault-Tolerant Model Predictive Control of Five-Phase PMSM Drives Under Single/Two Open-Switch FaultsIEEE Transactions on Industrial Electronics, 2023
- A Novel Modulation Strategy for Asymmetrical Six-Phase Series-Winding PMSM Based on Predictive ControllerIEEE Transactions on Industrial Electronics, 2022
- Current-Source Inverter Fed Five-Phase PMSM Drives With Pentagon Stator Winding Considering SVM Scheme, Resonance Damping, and Fault ToleranceIEEE Transactions on Industrial Electronics, 2022
- Design Criterion and Analysis of Hybrid-Excited Vernier Reluctance Linear Machine With Slot Halbach PM ArraysIEEE Transactions on Industrial Electronics, 2022
- A Series-Winding Topology Converter With Capability of Fault-Tolerant Operation for Active Magnetic Bearing DriveIEEE Transactions on Industrial Electronics, 2021
- Direct Modulation Pattern Control for Dual Three-Phase PMSM Drive SystemIEEE Transactions on Industrial Electronics, 2021
- Unified Analysis of Winding Connection Sequence in Series-End Winding TopologyIEEE Transactions on Industry Applications, 2020
- Effect of Phase Shift Angle on Radial Force and Vibration Behavior in Dual Three-Phase PMSMIEEE Transactions on Industrial Electronics, 2020
- Diagnosis of Open-Switch and Current Sensor Faults in PMSM Drives Through Stator Current AnalysisIEEE Transactions on Industry Applications, 2019