Two-dimensional arc stagnation pressure measurements for the double-electrode GTAW process
- 19 April 2016
- journal article
- research article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 21 (4) , 275-280
Abstract
Double-electrode gas tungsten arc welding (GTAW) is a relatively new GTAW variant that has been studied and developed over recent years, with the aim being to achieve a robust high-speed and high-current process with subsequent productivity improvements. In this present study, two-dimensional arc stagnation pressure measurements were performed, allowing a broad visualisation of the arc pressure distribution at the area above the welding torch, with a 0.5 mm resolution. The influence of the distance between the electrodes was evaluated and the results were compared with the conventional GTAW process. It was found that this distance greatly modifies the resulting arc morphology and, consequently, the arc pressure distribution. The results showed that the double-electrode process has much lower pressure than the single-electrode GTAW, for example, using the minimal possible distance between the electrodes results in about half of the maximum pressure measured for the single electrode, which would enable the development of high productivity applications.Keywords
This publication has 14 references indexed in Scilit:
- Numerical analysis of the heat source characteristics of a two-electrode TIG arcJournal of Physics D: Applied Physics, 2011
- Penetration increase of AISI 304 using ultrasonic assisted tungsten inert gas weldingScience and Technology of Welding and Joining, 2009
- Shape Control of TIG Arc Plasma by Cusp Type Magnetic Field with Permanent MagnetsQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2009
- Experimental study on improving welding efficiency of twin electrode TIG welding methodScience and Technology of Welding and Joining, 2006
- Humping mechanisms present in high speed weldingScience and Technology of Welding and Joining, 2006
- Physics characteristic of coupling arc of twin-tungsten TIG weldingTransactions of Nonferrous Metals Society of China, 2006
- The characteristic of twin-electrode TIG coupling arc pressureJournal of Physics D: Applied Physics, 2006
- Effects of high-intensity ultrasonic-wave emission on the weldability of aluminum alloy 7075-T6Materials Letters, 2003
- Numerical simulation of the arc pressure in gas tungsten arc weldingJournal of Materials Processing Technology, 1996
- Pressures produced by gas tungsten arcsMetallurgical Transactions B, 1986