Corrosion Behavior of Homogenized and Extruded 1100 Aluminum Alloy in Acidic Salt Spray
Open Access
Abstract
The 1100 aluminum alloy has been widely used in many industrial fields due to its high specific strength, fracture toughness, excellent thermal conductivity, and corrosion resistance. In this study, the corrosion behavior of the homogenized and hot-extruded 1100 aluminum alloy in acid salt spray environment for different time was studied. The microstructure of the 1100 aluminum alloy before and after corrosion was characterized by an optical microscope (OM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and a laser scanning confocal microscope (LSCM). The difference in corrosion resistance between the homogenized and extruded 1100 aluminum alloy was analyzed via the electrochemical method. The results indicate that after hot extrusion at 400 °C, the microstructure of the 1100 aluminum alloy changes from an equiaxed crystal structure with (111) preferentially distributed in a fibrous structure with (220) preferentially distributed. There was no obvious dynamic recrystallization occurring during extrusion, and the second-phase particles containing Al-Fe-Si were coarse and unevenly distributed. With the increase in corrosion time, corrosion pits appeared on the surface of the 1100 aluminum alloy, and a corrosion product layer was formed on the surface of the homogenized 1100 aluminum alloy, which reduced the corrosion rate. After 96 h of corrosion, the CPR of the extruded samples was 0.619 mm/a, and that of the homogenized samples was 0.442 mm/a. The corrosion resistance of the extruded 1100 aluminum alloy was affected by the microstructure and the second phase, and no protective layer of corrosion products was formed on the surface, resulting in a faster corrosion rate and deeper corrosion pits.Keywords
Funding Information
- National Key Research and Development Program of China (2021YFB3701303, U1902220, 51674166, SJTU2210)
- National Natural Science Foundation of China (2021YFB3701303, U1902220, 51674166, SJTU2210)
- SJTU-Warwick Joint Seed Fund (2021YFB3701303, U1902220, 51674166, SJTU2210)
This publication has 21 references indexed in Scilit:
- Effect of pH value, chloride ion concentration and salt spraying time on salt fog corrosion resistance of friction stir welded AA7075-T651 alloy jointsInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2023
- Corrosion Behavior of Commercially Pure Aluminum Processed through Conventional and New ECAP DiesJournal of Materials Engineering and Performance, 2023
- Corrosion Behavior and Microstructure of 2024 Aluminum Alloy Sheets by Shot Peen Forming in a Salt Spray EnvironmentJournal of Materials Engineering and Performance, 2022
- Characterization of mechanical and corrosion properties of cryorolled Al 1100 alloy: Effect of annealing and solution treatmentTransactions of Nonferrous Metals Society of China, 2021
- Comparison study on the corrosion behavior of aluminum alloys in different acidic mediaMaterials Today: Proceedings, 2021
- Research on corrosion performance of 6061 aluminum alloy in salt spray environmentMaterialwissenschaft und Werkstofftechnik, 2020
- The effect of grain size and grain boundary misorientation on the corrosion resistance of commercially pure aluminiumCorrosion Science, 2019
- Influence of multi-channel spiral twist extrusion (MCSTE) processing on structural evolution, crystallographic texture and mechanical properties of AA1100Materials Science and Engineering: A, 2018
- Corrosion behaviour of Al 1050 severely deformed by rotary swagingMaterials & Design (1980-2015), 2014
- A study on the corrosion behavior of aluminum alloys in seawaterMaterials & Design (1980-2015), 2008