Single-Crystalline LiNbO₃ Film-Based Piezoelectric Sensors for Ultra-Precision Pressure-Sensing Applications
- 9 April 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (10) , 15909-15917
Abstract
This work presents the fabrication and characterization of a sub-GHz plate-wave-based pressure sensor relying on an ultra-thin (360 nm) single-crystalline LiNbO 3 film. The proposed devices exhibit multiple resonant modes which are characterized and analyzed by a precise 3D plate wave resonator model based on finite element analysis (FEA). Generally, the main resonant modes correspond to the Shear-horizontal ( SH ) and anti-symmetric ( A ) Lamb waves. To overcome the high-temperature coefficient of LiNbO 3 thin film, a thick layer (~4 μm) of SiO 2 was used to compensate for the temperature drift of the devices; the calculated temperature coefficients of frequency ( TCFs ) for the multi-resonant modes are lower than -27 ppm/K. The frequency and return loss (S 11 ) shift of the plate wave devices, the pressure sensitivity, and the pressure coefficient of frequency ( PCF ) were experimentally evaluated and analyzed. All the resonant modes show high PCF even with relatively lower operating frequencies (< 1 GHz). Especially it has been observed that the first-order anti-symmetric (A1) Lamb wave is ultra-susceptible to pressure changes, which presented a record high value of ~600 ppm/Bar and excellent linearity over the tested 0.6 to 1.8 Bar pressure range. The results show that the developed sensor has sufficiently high sensitivity and can be used for precise absolute pressure sensing.Keywords
Funding Information
- National Key Research and Development Program of China (2023YFB3211303)
- National Natural Science Foundation of China (52205598, 62001318)
- Jiangsu Province Natural and Science Foundation (BK20210708)
This publication has 36 references indexed in Scilit:
- Design and fabrication of an absolute pressure MEMS capacitance vacuum sensor based on silicon bonding technologyVacuum, 2021
- Bulk acoustic wave resonator based wireless and passive pressure sensorVacuum, 2020
- Wafer-Scale Fabrication of 42° Rotated Y-Cut LiTaO3-on-Insulator (LTOI) Substrate for a SAW ResonatorACS Applied Electronic Materials, 2019
- Langasite crystal based pressure sensor with temperature compensationSensors and Actuators A: Physical, 2018
- Integrated lithium niobate electro-optic modulators operating at CMOS-compatible voltagesNature, 2018
- Surface modifications of crystal-ion-sliced LiNbO3 thin films by low energy ion irradiationsApplied Surface Science, 2018
- Advanced numerical technique for analysis of surface and bulk acoustic waves in resonators using periodic metal gratingsJournal of Applied Physics, 2014
- Bendable ZnO thin film surface acoustic wave devices on polyethylene terephthalate substrateApplied Physics Letters, 2014
- High precision pressure sensors based on SAW devices in the GHz rangeSensors and Actuators A: Physical, 2013
- Studies of a high-sensitive surface acoustic wave sensor for passive wireless blood pressure measurementSensors and Actuators A: Physical, 2011