Enhancing the Mechanical Performance of Recycled Polyolefins Through Stainless Steel Mesh Reinforcement Processed by Injection Molding
- 30 July 2026
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (40)
Abstract
Mechanical degradation during recycling limits recycled plastics in structural applications, perpetuating reliance on virgin polymer. This study introduces PolyMesh, a manufacturable reinforcement concept in which SS304 stainless steel woven wire mesh is embedded within recycled high‐density polyethylene (rHDPE) and recycled polypropylene (rPP) via insert injection molding. The influence of mesh density on tensile (ASTM D3039/D3039M; using 4 × 4, 5 × 5, 20 × 20, and 30 × 30 mesh counts) and flexural (ASTM D790; introducing an intermediate 8 × 8 density) mechanical performance was systematically investigated. Mesh reinforcement produced modest tensile stiffness improvements (maximum Young's modulus increase: +12.4% for rHDPE with 30 × 30 mesh; +3.7% for rPP with 20 × 20 mesh). In contrast, flexural testing revealed substantially stronger reinforcement effects: rHDPE achieved up to 13.46% improvement in flexural modulus (8 × 8 mesh) and 13.77% in flexural strength (4 × 4 mesh), while rPP exhibited a flexural modulus gain of 61.40% (8 × 8 mesh) and flexural strength improvements of up to 15.06%. The divergent tensile–flexural response indicates PolyMesh acts primarily through geometric bending stiffness enhancement rather than interfacial load transfer, consistent with the elastic modulus mismatch between SS304 and the polymer matrix. These findings establish PolyMesh as a viable, scalable strategy for upgrading recycled polyolefins in flexure‐dominated, non‐critical structural applications.Keywords
This publication has 15 references indexed in Scilit:
- Overcoming Challenges in 3D Printing of Polyolefins and Their Composites: A Review on Strategies for Improved Printability and PerformancePolymer Engineering & Science, 2026
- The robust design of recyclable stainless steel mesh-reinforce FEP composite membrane for the purification of emulsionJournal of the Taiwan Institute of Chemical Engineers, 2024
- Creating Sustainable Composites from Pyrolyzed Burlap and Ocean-Recycled Plastics using FDMACS Sustainable Chemistry & Engineering, 2024
- Influence on the mechanical properties of virgin recycled polypropylene composites with different types of reinforcing loadsMaterials Today: Proceedings, 2023
- Enhancing the thermoplastic behavior and mechanical performance of recycledHDPE/CaCO3composites using oxidized polyethyleneJournal of Applied Polymer Science, 2023
- A critical review of the current progress of plastic waste recycling technology in structural materialsCurrent Opinion in Green and Sustainable Chemistry, 2023
- Effects of mechanical recycling on optical properties and microstructure of recycled high‐density polyethylene pellets and bottlesJournal of Applied Polymer Science, 2022
- Recycling of polymer blendsAdvanced Industrial and Engineering Polymer Research, 2021
- An investigation on recycled PET/PP and recycled PET/PP‐EP compatibilized blends: Rheological, morphological, and mechanical propertiesJournal of Applied Polymer Science, 2015
- Mechanical properties of recycled PVC blends with styrenic polymersJournal of Applied Polymer Science, 2006