Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Shaheryar Atta Khan has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Technical Assessment of a Catamaran-Based Offshore Floating Photovoltaic System for Sheltered Coastal Waters

    by Muhammad Abdullah Mehtab, Muhammad Ismail Arshad, Shaheryar Atta Khan, Syed Husain Momin Zaidi, Zeeshan Riaz

    Rapid growth in electricity demand and land scarcity in coastal regions have necessitated the exploration of marine renewable energy solutions. This study presents the conceptual design and simulation-based validation of a small-scale Offshore Floating Photovoltaic (OFPV) system optimized for Pakistan’s sheltered coastal waters. The proposed platform features a Class-3 modular catamaran configuration supported by High-Density Polyethylene (HDPE) pontoons. A coupled multi-disciplinary framework integrating MAXSURF Software hydrostatic analysis and PVsyst for performance modeling is employed. Simulation results confirm satisfactory intact stability with positive righting lever characteristics and a projected annual energy yield of 5.8 MWh for the prototype unit. The results demonstrate that while the proposed system achieves stable photovoltaic energy generation under sheltered coastal conditions, hydrodynamic resistance constraints fundamentally limit continuous mobility, thereby defining OFPV platforms as stationary energy assets rather than self-propelled vessels. These findings validate the technical feasibility of OFPV system deployment in creek systems and inner harbors as a scalable alternative to terrestrial solar farms.

  • Design and Development of an Uncrewed Surface Vessel (USV) for Hydrographic Survey

    by Bhupen Pervaiz Bheem, Khatiba Noor, Zeeshan Riaz, Junaid Ahmed Khan, Shaheryar Atta Khan, Faheem Ur Rehman, Muhammad Yasrab

    The demand for efficient hydrographic surveying in shallow and hazardous waters highlights the limitations of conventional manned survey platforms. Uncrewed Surface Vehicles (USVs) have emerged as versatile maritime platforms for autonomous operations in both civilian and defense applications. This study presents the design of a USV for hydrographic surveys that can operate autonomously or remotely in marine environments. With a stable catamaran hull, Brushless DC motor drive, and Lithium Polymer battery power, the USV has enhanced endurance, real-time data communication, and consistent performance. In this paper, the CFD simulations were conducted to evaluate the hydrodynamic resistance offered by the hull under steady forward motion in calm water using open source CFD software, OpenFOAM, after necessary validation. While the static stability analysis was performed using Paramarine software. A physical prototype was constructed and operated in a controlled environment. Simulations and field trials substantiated its effectiveness and underscored its applicability to marine research, monitoring, and commercial applications. The developed USV demonstrated a hydrostatically stable and maneuverable design with support for adequate payload capacity.

  • Open Access

    Techno-Economic Assessment of Dye-Sensitized Solar Cells for Potential Agrivoltaic Applications Integrated with Direct Air Capture

    by Antash Najib, Aleena Amin Khuwaja, Jaishree Rajput, Muhammad Arsal, Asad A. Zaidi, Shaheryar A. Khan, Abbas Hussain, Syed Aqueel Shah

    The rapid expansion of solar photovoltaics has intensified land-use competition between renewable energy and agriculture, particularly in regions where food security and clean-energy transitions must progress together. Semi-transparent photovoltaic technologies may provide a land-use-compatible pathway for potential agrivoltaic applications by allowing partial light transmission while generating electricity. This study evaluates Dye-Sensitized Solar Cells (DSSCs) as a semi-transparent photovoltaic option and investigates the use of DSSC-generated electricity to power Direct Air Capture (DAC). The scope is limited to photovoltaic-system performance and economics and does not include Photosynthetically Active Radiation (PAR) transmission, crop growth, crop yield, or microclimate analysis. A techno-economic assessment was performed using the System Advisor Model for two contrasting regions, Karachi, Pakistan, and Davis, USA. DSSC and monocrystalline silicon systems were compared over the same land area. Due to their lower installed capacity, the DSSC systems generated less annual electricity. However, their lower assumed capital expenditure resulted in a Levelised Cost of Electricity (LCOE) that was 10% lower in Davis, at US Dollars (USD) 0.29/kWh, and 0.7% lower in Karachi, at USD 0.25/kWh. Based on literature-reported DAC energy requirements, the DSSC systems could support annual Carbon Dioxide (CO2) removal of 331–9707 tonnes in Karachi and 334–9783 tonnes in Davis, depending on the selected DAC pathway. These results indicate that semi-transparent DSSCs may provide a lower-capital, land-use-compatible photovoltaic pathway combined with renewable-electricity-driven carbon removal. Their suitability for practical agrivoltaic deployment requires future PAR-transmission measurements and crop-specific experimental validation.

  • Enhancing the Mechanical Performance of Recycled Polyolefins Through Stainless Steel Mesh Reinforcement Processed by Injection Molding

    by Laiba Asif, Abbas Hussain, Shaheryar Atta Khan, Mirza Ali Aadil Salman Baig, Hasnain Ali Shaikh, Wajahat Ahmed, Antash Najib, Adil Loya, Anjum Naeem Malik

    Mechanical degradation during recycling limits recycled plastics in structural applications, perpetuating reliance on virgin polymer. This study introduces PolyMesh, a manufacturable reinforcement concept in which SS304 stainless steel woven wire mesh is embedded within recycled high‐density polyethylene (rHDPE) and recycled polypropylene (rPP) via insert injection molding. The influence of mesh density on tensile (ASTM D3039/D3039M; using 4 × 4, 5 × 5, 20 × 20, and 30 × 30 mesh counts) and flexural (ASTM D790; introducing an intermediate 8 × 8 density) mechanical performance was systematically investigated. Mesh reinforcement produced modest tensile stiffness improvements (maximum Young's modulus increase: +12.4% for rHDPE with 30 × 30 mesh; +3.7% for rPP with 20 × 20 mesh). In contrast, flexural testing revealed substantially stronger reinforcement effects: rHDPE achieved up to 13.46% improvement in flexural modulus (8 × 8 mesh) and 13.77% in flexural strength (4 × 4 mesh), while rPP exhibited a flexural modulus gain of 61.40% (8 × 8 mesh) and flexural strength improvements of up to 15.06%. The divergent tensile–flexural response indicates PolyMesh acts primarily through geometric bending stiffness enhancement rather than interfacial load transfer, consistent with the elastic modulus mismatch between SS304 and the polymer matrix. These findings establish PolyMesh as a viable, scalable strategy for upgrading recycled polyolefins in flexure‐dominated, non‐critical structural applications.


  • Open Access

    Comparative Mechanical Characterization of Recycled PVC and Wood–Plastic Composites

    by Ifrah Asif, Eylia Abbas Jafri, Sohail Hasnain, Muhammad Areeb Rizwan, Shaheryar Ahmed Khan

    Recycled polymers offer opportunities for circular material use, yet their mechanical performance is often limited by feedstock variability. This study provides a controlled comparison of neat recycled PVC and WPC (PVC + 20 wt.% wood flour) processed under identical extrusion and compression-molding conditions. Tensile, flexural and hardness tests were conducted according to ASTM standards, and results are reported as mean ± standard deviation (n = 5). The WPC exhibited modest but measurable increases in tensile strength (~12%), flexural strength (~8%), and Shore D hardness (~8.5%), while tensile and flexural moduli remained statistically comparable between the two materials. Flexural modulus exceeded tensile modulus for both materials, consistent with surface-dominated stress distributions in bending. The findings demonstrate that incorporating 20 wt.% wood flour into recycled PVC can enhance selected mechanical properties without compromising stiffness, offering a performance profile consistent with material-substitution pathways in circular-economy strategies. The study also highlights the influence of recycled feedstock variability and identifies the need for future microstructural characterization to confirm the hypothesized deformation and failure mechanisms.

  • Open Access

    Thermo-Mechanical FEM Study of SMAW Parameter Effects in S355J2+N / ASTM A572 Gr.50 Dissimilar Steel Joints

    by Syed Farrukh Haider, Shaheryar A. Khan, Aqueel Shah, Muhammad Nasir Bashir, Asif Mansoor, Abbas Hussain, M. Mahmood Ali, Salman Nisar

    Shielded Metal Arc Welding (SMAW) is widely employed in structural steel fabrication; however, the thermo-mechanical response of dissimilar structural steel joints remains insufficiently explored through numerical modeling. In this study, a three-dimensional transient thermo-mechanical finite element model is developed to investigate SMAW of dissimilar S355J2+N and ASTM A572 Grade 50 steel plates. Goldak’s double-ellipsoidal heat source is implemented to represent arc heat input, and a Box–Behnken design is employed to systematically examine the influence of welding current, voltage, and travel speed. The analysis focuses on peak temperature, out-of-plane distortion, and elastic stress indicators derived from a linear thermo-elastic formulation. The results indicate that welding current predominantly governs peak temperature, while travel speed has the strongest influence on thermal gradients and distortion behavior; voltage exhibits a secondary but non-negligible effect on heat distribution. Simulated thermal and deformation trends are benchmarked against published experimental and numerical studies on comparable structural steels and show consistent qualitative behavior. Owing to the absence of plasticity, temperature-dependent material properties, and direct experimental validation, stress results are interpreted solely as qualitative indicators rather than physically realistic residual stresses. The study provides a structured thermo-elastic FEM and design-of-experiments–based sensitivity framework for a dissimilar structural steel combination not previously reported in SMAW numerical studies, offering practical insight into parameter screening for thermal and distortion control in structural steel fabrication.

  • Open Access

    Additive Manufacturing of Cupric Oxide via Direct Ink Writing

    by Muhammad Ali, Shaheryar A. Khan, Aqueel Shah, Antash Najib, Abbas Hussain

    The DIW approach offers numerous benefits, including expedited prototyping, cost-effectiveness, reduced waste in manufacturing, and enhanced design flexibility. It's currently a popular production method for building materials and has great potential for porous and electronic materials. In this study, porous cupric oxide (CuO) ceramics were fabricated using a direct ink writing (DIW) approach based on a copper particle–laden aqueous precursor. The ink formulation was optimized to achieve stable extrusion and crack-free green bodies, yielding a final composition of 68.0 wt% Cu, 31.3 wt% water, and 0.6 wt% CMC. Following oxidation and sintering in air, the printed structures exhibited a bulk density of 3.60 ± 0.20 g cm⁻³ and a corresponding theoretical porosity of 43.7 ± 0.9%. X-ray diffraction confirmed nearly phase-pure monoclinic CuO with no detectable Cu or Cu₂O residues. The printed components exhibited an interconnected, porous microstructure and a four-point-probe resistivity of 10.5 ± 0.3 Ω·m at 25 °C, reflecting the influence of high porosity on charge transport. The DIW route demonstrated here provides a controllable pathway for producing porous CuO architectures with tunable microstructure and moderate electrical conductivity. These characteristics suggest potential applicability in gas filtration, catalytic supports, and electrochemical sensing; however, device-level validation is still required to fully assess functional performance.

  • Open Access

    Analysis of the Surface Quality and Temperature in Grinding of Acrylic-Based Resin

    by Syed Mustafa Haider, Abbas Hussain, Muntazir Abbas, Shaheryar Atta Khan, Shoaib Sarfraz

    Polymeric resins are becoming increasingly popular in medical and engineering applications due to their properties, such as their low weight, high strength, corrosion resistance, non-allergenicity, and extended service life. The grinding process is used to convert these materials into desired products, offering high accuracy and surface quality. However, grinding generates significant heat, which can potentially degrade the material. This study investigates the grinding of acrylic-based resins, specifically focusing on the interplay between the grind zone temperature and surface finish. The low glass transition temperature (57 °C) of the acrylic necessitates the precise control of the grinding parameters (spindle speed, feed rate, depth of cut, and grinding wheel grain size), to maintain a low temperature and achieve high-quality machining. Thermal imaging and thermocouples were employed to measure the grind zone temperature under various grinding conditions. This study investigates the influence of four parameters: spindle speed, feed rate, depth of cut, and grinding wheel grain size. The best surface finish (Ra: 2.5 µm) was obtained by using a finer-grained (80/Ø 0.18 mm) grinding wheel, combined with slightly adjusted parameters (spindle speed: 11.57 m/s, feed rate: 0.406 mm/rev, depth of cut: 1.00 mm), albeit with a slightly higher grind zone temperature (~54 °C). This study highlighted the importance of balancing the grind zone temperature and surface finish for the optimal grinding of acrylic-based resins. Further, this research finds that by carefully controlling the grinding parameters, it is possible to achieve both a high surface quality and prevent material degradation. The research findings could be highly valuable for optimizing the grinding process for various medical and engineering applications.


  • Identification of critical success factors (CSFs) for successful project management in manufacturing sector

    by Muhammad Nadeem Zia, Aqueel Shah, Shaheryar Atta Khan, Antash Najib

    Purpose: This research has been carried out to study the impact of critical success factors (CSFs) on successful project management of projects in the manufacturing sector. These success factors will pave the way for the successful completion of projects for the manufacturing sector. CSFs play a vital role in the timely conclusion of projects in any organization. For the projects to be successful certain essential factors must be taken into account. These essential factors are identified through this research.Design/methodology/approach: During this study an adaptive survey of the literature was conducted, after a detailed literature review certain success factors were identified for project management in the manufacturing sector. The number of success factors was reduced to 40 factors based on the level of incidence in the literature. The length of the questionnaire was also given due importance to make the survey more interesting and effective. After that Fuzzy Delphi Method (FDM) was employed to screen the most essential factors. In the end, the Fuzzy Analytical Hierarchical Process (FAHP) was used to rank these factors in order of importance.Findings: Project Manager Leadership Skills, Economic Environment, Top Management Support, Project Planning, Clear and realistic Goals, and Financial Support have come out to be the most important CSFs for successful project management in the manufacturing sector.Originality/value: This is novel research to identify CSFs for project management in the manufacturing sector. Previously, most of the studies remained focused on construction and software projects.